Need at least 900wpc in 4ohm


Suggestions for what can do the job? Thanks.
tccaux
Bridge a pair of Mcintosh Mc 2500 or Mc 2600 amps together. 1 to 1.2KW of power.
Krell 700cx; 1400 Wpc into 4 Ohms.

By the the JC1 won't do that, 800 Wpc perhaps.
Steve -

Per the Stereophile review the JC1s measured:

585W @ 8 Ohms
1154W @ 4 Ohms
2255W @ 2 Ohms
4.2kW @ 1 Ohm

Google it and you can see the tests. Krell is another great choice!
Parasound JC1 testing from Stereophile:

With continuous drive, the Parasound clipped at 545W into 8 ohms (27.4dBW)—way above the specified 400W. ("Clipping" is defined, as usual, as the power level where the measured THD figure reaches 1%, and is shown in fig.7 as the horizontal magenta line.) With a low-duty-cycle 1kHz toneburst more representative of music, the Halo was a powerhouse. Its clipping power increased by 0.3dB into 8 ohms, reaching 586.5W at 1% THD (27.7dBW, fig.7, black trace), with 1154W available into 4 ohms (27.6dBW, blue), 2255W into 2 ohms (27.5W, green), and no less than 4.2kW into 1 ohm (27.2dBW, magenta). The latter is equivalent to an output current of 64.7A!

Sounds fantastic too!