Old NAD or newer high powered Denon?


I am currently running a NAD 3020 in my main system. I love the amp. When paired with my Sequerra MET7's it sounds great. I also have a pair of Vandersteen 1C's and I am thinking that the NAD's don't have enough power to drive them. I am getting relatively poor sound quality out of the 1C's with the NAD. It closed in and not very dynamic (when compared to the MET7's). I have heard the 1B's in the past and they sounded amazing which is why I initially purchased them.

So my question is: would I gain anything in terms of sound quality of I purchase a higher powered more recent model Denon or am I just hearing the differences between the MET7 and the 1C's?
hifibear
Larry, great minds think alike -- ST-70.

Hifibear, your objection to tubes isn't clear, "imagine missing tubes". You suspect your kids might steal them? Many Dyna ST-70s can be found with original cage which is screwed on to the chassis. If the little buggers are that persistent, nothing is likely to stop them from messing up something.

Nothing against the SE240, I never heard one. I just know that near magic can be found with a decent tube amp and Vandy speakers.
Pryso and Hifibear, sorry getting long winded. FYI the last versions of the Hafler amps with Jfet driver/Mosfet output play (not sound) my hard to drive speakers like a tube amp. When the absolute sound reviewed the XL280 the reviewer loved it but as usual HP POO POOed it. I loved David Hafler's response..talk about speaking from authority about designs. He said his amp would compete with any $2000+ amp and I agree. The only transistor amp that I have heard that compares is the BAT amps...few more dollars. The Haflers do very in "whiteish" sound in the midrange that HP heard..but let them break in and warm up it goes away. One Tech told me that the class A point varied in the Haflers. If they run hot...good sound.
Pryso...I know. I'm a tube guy also... it is amazing how a good tube amp can "open up" speakers..especially with multiple drivers and complicated crossovers....and how a 30 watt tube amp can sound as "big" as a 200 watt transistor sometimes. FYI I just had a ARC ST70-C modified/updated per Bill Johnson's 2004 memo circulating on the internet. I was nervous about touching this amp because it sounded great anyway. But WOW! the magic in the midrange is more transparent and both the top end and bottom end have been extended. I own several expensive tube amps and I am looking at this little old box and wondering why would I hook anything else up?? This amp easily plays my DQ10s and Infinity RSIIbs . . . 30 watts are you kidding me??? I've had Threshold and Sumo class A amps die on these speakers?? go figure. I think I will go fire him up...again
Thanks all. You have all been a great help. I'm gonna look for a garage sale st70. Wish me luck.
Hifibear, hopefully a good decision, but I must add some cautions.

Any ST-70 will be old. I built one from a kit in the late '60s as the foundation
for my first stereo system. It remained a current product up until the mid-
'70s I believe. Then a subsequent owner of Dynaco later offered a Mk 2
version for awhile. But they sold in huge numbers and a good many remain in
use. The first thing will be to check the tubes. Then, be sure the amp can be
biases correctly. If you suspect the amp you find is original it would be well
to at least replace the capacitors.

One reviewer suggested that ANY amp with EL-34 output tubes would likely
be pleasing and musical (assuming it was working properly). The ST-70
clearly stood the test of time since it remains popular 50 years later. But
while it may be one of the best amps for the money, no one should expect it
to be one of the best amps. Various brands mentioned in my first response
will outperform it, but they will all cost more.

Because the ST-70 was and remains so popular, many modifications are
available. The ARC ST70-C for example was a version designed by William Z.
Johnson, the man behind Audio Research. But those are not too common. I
think a clean, stock ST-70 example can be found for $200-400, depending
on your luck. One that has been modified by a reputable company/designer
may cost $500-800. Start with Audiogon ads.

If any of this sounds intimidating, you may be best to fall back on the Hafler
recommendation. If not, good luck to you.