Does the volume control effect sound quality?

I know we aren't supposed to be off topic here but is the Pope Catholic?? IOW, yes.

Georgelofi, we've done a lot of experiments with controls and I find that I can't agree with your regarding relays. Universally they were inferior to a good quality rotary stepped switch. However, switches are quite variable so I can see good relays being better than some switches. But if you have higher quality switches the relays don't stand a chance.

From what I understand of light-activated devices, one would have to be quite careful in doing a substitution in the case of this preamp! The light activated devices I have seen can cover a pretty wide range of resistances- the higher values, even if a better device, will still introduce coloration that an inexpensive control of the right value wont have due to the Miller Effect issue. IOW things are getting dicy if the control is able to exceed 250K.

With experiments with volume controls go back as far as the 1970's, this is what has bought about the ldr Lightspeed Attenuator.
Almost all rotary switches have a stiff disc wiper made out of a different material to the springier metal that the leaf/leaves are made out of.The two contact points in relays are at least made out of the same material.
It is comon knowledge that two different metals that are a touch contact with current/voltage passing through them will creat a "diode effect" electrolosis or glavaic.

Herve Delartz of DartZeel backs this up as well, this is why he does not use contact volume controls either in his $25k NHB-18NS preamp but uses ldr's which have no contact.

http://www.6moons.com/audioreviews/dartzeel2/preamp.html

Quote interview with Herve:
Q: What is wrong with conventional volume controls?
A: You lose something. I use a system that varies resistance with light. However, until all the patents are in place, I would prefer not to specify the details.

Cheers George

Guess I'll have to install the inductive volume control and see if there's any freq response problems. Some things in audio are just unpredictable.

Inductive?? the worst you can have is an iductive wire wound pot, that comes in at no.8 on my decending horror list?

Cheers George

Inductive = Autoformer volume control. Example, Slagleformer in the Bent Audio Tap X, one of the best passive preamps around. George, I think you're thinking of the wrong volume control.