2. amps-preamps
  3. 1367520258

Can I connect 2 Adcom Preamps?

I am new to this and I have the following system, Adcom GTP-600 preamp, Adcom GFA-5500 and Adcom GFA-6000 amps. I have been running my phono through a Recoton converter. Recently I acquired an Adcom GTP-500 preamp which has phono inputs, but not enough space for everything I have. Is it possible to just add this preamp to the setup I already have?
gwoman
tls49's avatar
tls49
1,351 posts
 
In addition to the response by Mofimadness, the GTP-500 has separate recording and listening selectors. If you use the preamp output, set the listening selector to phono, and if using the tape output, set the recording selector to phono.
gwoman OP
2 posts
 
Awesome thank you for the quick response. I am nowhere near home, but I will hook them up as soon as I get there. Thank you very much.
gwoman OP
2 posts
 
Ok just one more question I am almost done getting all this to work. I have connected all my speakers to my GFA-6000, but where do the inputs go to? I don't see anything on my GTP-600 that would accommodate them.
tls49's avatar
tls49
1,351 posts
 
Preamp outputs from GTP-600 to inputs on GFA-6000.
mofimadness's avatar
mofimadness
4,985 posts
 
The GTP-600 is a surround preamp/processor so the outputs are labeled FRONT RIGHT & LEFT, REAR RIGHT & LEFT and there are (2) CENTER CHANNEL outputs. They are located right under the S-VIDEO inputs on the GTP-600.
More to discover