Djcxxx, your MC601's input impedance of 20K ohms is the maximum load recommended by ARC. If you are running anything else off the other Ref 5 outputs (e.g., a sub woofer), the combined impedance load that the Ref 5 sees will likely drop below 20K ohms. It might be worthwhile to have a call with Kal at ARC to learn if he thinks the 20K ohm load is ok.
Audio Research Reference 5SE reliability
After reading the glowing revieuw on the Stereophile-website by Brian Damkroger on the ARC REF5SE there was a comment that: quote: by Audioware on nov 15, 2012,
"These pres are outstanding. However the problem is their poor reliability. 06 (six) of them were already on my services bench this year to fix problems with the transformer that feeds the dgital, the remote control and the on-off switch, circuits. It is a small xformer below the circuit board that burns out frequently. Another very serious problem is with the 6H30s filament regulators that do not stand for the increased current demanded by the new 6H30s intead of the old 6922s. ARC has to pay more attention to these problems!"
I already checked my dealer, who was really surprised and did not recognise these problems.
Comments will be greatly appreciated! Thanks.
"These pres are outstanding. However the problem is their poor reliability. 06 (six) of them were already on my services bench this year to fix problems with the transformer that feeds the dgital, the remote control and the on-off switch, circuits. It is a small xformer below the circuit board that burns out frequently. Another very serious problem is with the 6H30s filament regulators that do not stand for the increased current demanded by the new 6H30s intead of the old 6922s. ARC has to pay more attention to these problems!"
I already checked my dealer, who was really surprised and did not recognise these problems.
Comments will be greatly appreciated! Thanks.
- ...
- 41 posts total
- 41 posts total