2. amps-preamps
  3. 1370624953

New tubes biasing problems

I recently got a CJ MV60SE amp. Since I didn't know how many hours the tubes had on them I figured I will replace the power tubes. I bought a set of 4 matched Elextro-harmonix 6550. I installed the new tube set, and attempted to bias the tubes. I had one tube that didn't seem to bias in the sense that I couldn't get the bias LED to light up and than off by turning the bias pot. After further investigation I noticed that the problem tube seems to be significantly colder than the rest of the tubes. It would take much longer than the other tubes to warm up. And would still feel colder (to the touch) after a long period of warm up. The amp seemed to operate well, in fact it sounded better than with the original tubes. But I am concerned that this may be a bad tube. My question is - is this something that is expected to happen frequently when replacing tubes? if it safe to operate the amp with such a tube until I get replacement again? and is this considered a bad tube that the vendor should replace for me? As this is my first experience with tubes, your reply is much appreciated.
oferi
Post removed 
zd542
5,339 posts
 
I agree with Viridian. Try the tube in a different socket and if the problem follows the tube, remove it. If it goes bad while the amp is on, you may do damage. I had the same amp. Its very easy to set bias and if you are getting the other 3 tubes set correctly, I can't see the problem being user error.

Other than that, its a great amp. You should be very happy with it.
justlisten's avatar
justlisten
489 posts
 
If it is not the tube, I would guess that the bias resistor for that socket is bad....a hassle, but a simple repair
rodman99999
6,123 posts
 
Put the original power tubes back in and see if they will bias properly(if you haven't already used the amp with them). If it turns out to be the new tube; YES- the provider should most definitely replace that tube, with one that matches the rest of the quad. With a fixed bias amp(such as yours); a closely matched quad is a necessity. You may have to send all four back, so another can be matched, or the whole set replaced.
More to discover