Coupling cap upgrade for Cary CAD-805C help

Would suggest the you contact Cary for advice on this. Also recommend the Cardas Teflon coupling caps. Replace the power supply 0.01uF bypass caps with the Jensen.

Thanks for all responses
I have pics of these Nichicon caps 3 of these have value of 47 uF 450V (tied together with tie-rod) and other 2 has value of 47uF 350V (smaller size than 450V)

I guess I need to open it up again to look for correct ones
I would love to replace power supply caps too.
Rodman, could you tell me where to look for these caps? what is the color of the stock coupling and power caps? or where they connected to? I see 3 blue color (no name 15000uF 16V) and some are marked Kimber Kap .22 puls/minus 10%
I did send email to Cary (Marc and Steve) explain that I would like to buy them from Cary for DIY to avoid $400 shipping cost but no response from them
Thanks

Hi all,
Here is what I found in this forum
1- Veteran member Brf preferred Mundorf MCap® Supreme Silver & Gold & Oil
2- Casouza stated (mine has only one 6SL7): Coupling caps are tipically .1uF to 1 uF, 400 or 630 Volts and are connected between plate of the first tube to grid of second tube and so on.
I believe your amps have one cap between first 6sn7 and second 6sn7, another one between second 6sn7 and 300B, one large cap between 300B and output tube.
This number match with CaryAudio web on 805AE
Based on statement above - my amp has only 2, but second one between 300B and 845/211 has larger value?
Rodman said 4 ?
BTW: My brother did upgrade his SLI-80 thru Cary and Cary folk recommended/installed Cardas cap over Jensen Oil (same price)

Oh lucky me :)
I found this exact model schematic service manual online
For reference: http://www.ainamoi.com/805c.htm
Thanks

Sorry to have confused you. My Cary monoblocks are not 805's, and have four 6550s each(push/pull amps), hence: two coupling caps each. The Deulands are available(discounted) at Parts Connexion. The only caps that are currently regarded more highly, by those that have done extensive(and megabuck) listening tests, are the Deuland Cast-PIO-Ag. Your amps should have 4) 1500uF/450V filter caps, each. I usually buy my bigger electolytics from Digikey or Mouser. They are both very finicky about the manufacture dates of the caps they sell. (http://jimmyauw.com/2009/08/18/extreme-capacitors-battle-2nd-session/) (http://www.partsconnexion.com/PDF/duelund.pdf) (http://www.digikey.com/product-detail/en/MAL210447152E3/4565PHBK-ND/2552542?cur=USD)