Octave Audio integrated amplifiers


Looking for feedback from anyone that's using Octave Audio integrated amps in their system. I'm interested in the V40 SE and the V70 SE but cannot find a lot of thoughts/comments on these.

Thanks in advance.
beatlebum
Thanks for the thoughtful response.

I typically don't listen at very loud levels (75 to 85 db) and so I'm wondering about the V40 SE and V70 SÉ's performance under these conditions.
IME,

the Octave integrated amps are sonic matches for Dynaudio, Thiel & Joseph Audio speakers.
Beatlebum - At those db levels the V40 would be fine. Like I said you get a little more control as you move up the line. My speakers are Dynaudio C1 sig rated at 85db. If your speakers are more efficient that is a plus. The Octave with EL34 tubes have less power and is better with 6550's or KT88's. You can run the KT120 in the V70 but I am not sure about the V40. BTW you will not get any more power out of the KT120 but you will be able to push them harder. The plate voltage of the V70 and V80 is 540 where the V110 is switchable between 540 and 620. Not sure but I would guess the v40 has the same 540 plate voltage.

I highly recommend the black box mainly because it lowers the noise floor and gives a bit more headroom.
Xti16,

Thanks again for the info.

My speakers are rated at 87.5/1W/1M. That said I am interested in the V40 SE and I'd probably end up running it with KT88's.

Do you know of a distributor or vendor that you could recommend?
Where are you located? In the USA the distributor is Dynaudio North America. As far as I know they are only sold through retailers. My local dealer is NextLevelav located in Bartlett Illinois who I would highly recommend if you have no local dealer.