Octave Audio integrated amplifiers

Thanks Xti16. Whether this v110 is enough to run with my room size of 10x14? Need any sub woofer?

Rabbani - my room is 12 X 26 with my Dyn C1's on the long wall. Actually the V40 is plenty but if your like me I'll take any little improvement. I also have a Rel B3 sub crossed over at 34hz. Just to add what the C1's can't do.

I owned the V70 with a Black Box. It was clean and powerful, but I did find them a bit too pristine, going from Naim I missed the excitement.

Currently using Vitus SS-010 and have been very satisfied with it on all fronts.

Source is dCS Debussy, speakers Living Voice OBX-R2 and Harbeth M30s

Recently put a W4S STP-SE preamp to front the SS-010 and with hugely satisfying results. Added PRaT to the Vitus.

Hello All.,
Thanks for your suggestion and Please recommend me the best tube for v-70se? Becoz I am not tube guy also no knowledge on that lines.

Rabbani - Best tube?? Which tube?? Input (12ax7 qty 1) - Driver/inverters (12at7 qty 2)- Output (qty 4). Any or all tubes will make a difference in sound. Which tubes are in yours? Are you to wanting to change the sound? If so in what way.

My V70SE came with SED KT88's for outputs and all SED input and driver tubes. Others I've seen had Sovtek 12ax7lps for an input and Rca 12at7wa's for driver/inverters. Even though I'm no big fan of the Tung Sol KT120 you might be. For me I found I need to change both the input and drivers to make the KT120's sound pretty good. I like the Rca 5751 (lower gain) triple mica black plate for an input or a Telefunken 12ax7. But for drivers I like the Mullard CV4024 or the Telefunken 5965 (12at7 long ribbed plates not short plates) for the KT120's. Again I found the KT120 to be a bit on the forward/bright side and changing those 'little' helped tame the sound for my tastes.

BTW Andreas Hoffman (owner and designer of Octave) states the KT120 works fine in the V70SE.