Vandersteen 2W frustration


I have been using a 2W sw for 2 years now. I do enjoy it and can see its potential and good qualities, such as its agility and general musicality. It kind of does its job but it looks to me that it is working like a woofer not a subwoofer.

And, considering it has 3 8" woofers, it does not move air. I do not know for certain if it is going doing where it should go in its frequency response. It is being implemented with a pair of Reference 3A MM de Capos which supposedly go down to 42 hz, and connected to a First Watt F4 stereo amplifier. The high pass filter is set at 72 hz with a pair of Mundorf caps. The subwoofer is fairly dated from 1992 at least and it is being on long term loan from a friend. Opened the amplifier module to check on the capacitors and they seem OK, not bloated, etc.

So is this supposed to work like what I described, or maybe the amp module should be checked. I wonder if the 2WQ model does a better job
In the moving air department. Any ideas ..... welcome.
manolo
The proprietary high pass crossover is nothing more than a first order filter, i.e., a capacitor which value depends on the main amp. input impedance. I have a 0.047 uf cap between my preamp and amp. to account for that.
i have a 2W as well and also replaced the vandersteen xovers with a pair of mundorf caps - nice improvement even over the M5's.

looks like the input impedance of your power amp is 47k, so your caps will result in a XOver freq at 73 hz - there's no issue there. the slightly lower frequency will actually result in a little increased output by the 2w. mine are setup nearly identically to yours.

stereophile's measurements corroborate -6db at 42hz, however, from 46 hz on down, the output is from the rear port and not the woofer. i wonder if the rear port may be 180 degrees out of phase from the driver, and therefore if the 2w is connected non-inverted, the 2w and the de Capos might cancel in the 42-55 (ish) hz region?

do you have an SPL meter and test tones so you can measure the in room response you are getting?

in my room, i'm down 6db at 20 hz, which is plenty for me.

the V2W, with it's passive radiator, will move more air. i doubt there will be any appreciable difference between the 2W and 2WQ in that regard.
Manolo
Get out your assesment box and owners manual that comes with the 2w
And try to go down one more on the settings box.
That's what this box is for.
Please let me know if you have any questions.
JohnnyR