checking. It turned out output increased substantially after dialing the gain to 91 db from 93 in the vandersteen sw. may be that the gain switch is not working properly. Remember that the unit is over 20 years old. also lowered the hp frequency to 60 hz but the bass got to prominent and lumpy, in short, unmusical. I guess that the 72 hz frequency I use is about right for my speakers. The unit blends seamlessly. Other subwoofers as you know, call attention to themselves. I am listening to The Lord of the rings soundtrack, to further check bass output and it seems ok. Maybe this q of 0.5 is the culprit here. Most subwoofers I have listened to in my friends systems do not have a q of 0.5 which is theoretically the right one. So, when the economy gets better I shall inquire about a 2wq.
Vandersteen 2W frustration
I have been using a 2W sw for 2 years now. I do enjoy it and can see its potential and good qualities, such as its agility and general musicality. It kind of does its job but it looks to me that it is working like a woofer not a subwoofer.
And, considering it has 3 8" woofers, it does not move air. I do not know for certain if it is going doing where it should go in its frequency response. It is being implemented with a pair of Reference 3A MM de Capos which supposedly go down to 42 hz, and connected to a First Watt F4 stereo amplifier. The high pass filter is set at 72 hz with a pair of Mundorf caps. The subwoofer is fairly dated from 1992 at least and it is being on long term loan from a friend. Opened the amplifier module to check on the capacitors and they seem OK, not bloated, etc.
So is this supposed to work like what I described, or maybe the amp module should be checked. I wonder if the 2WQ model does a better job
In the moving air department. Any ideas ..... welcome.
And, considering it has 3 8" woofers, it does not move air. I do not know for certain if it is going doing where it should go in its frequency response. It is being implemented with a pair of Reference 3A MM de Capos which supposedly go down to 42 hz, and connected to a First Watt F4 stereo amplifier. The high pass filter is set at 72 hz with a pair of Mundorf caps. The subwoofer is fairly dated from 1992 at least and it is being on long term loan from a friend. Opened the amplifier module to check on the capacitors and they seem OK, not bloated, etc.
So is this supposed to work like what I described, or maybe the amp module should be checked. I wonder if the 2WQ model does a better job
In the moving air department. Any ideas ..... welcome.
- ...
- 9 posts total
- 9 posts total