Aluminum Foil test for Audio Desk Vinyl Cleaner



I came accross this Aluminum Foil Test in You tube to check the purported cavitation power of ultrasonic cleaners. A positive test should create holes or perforations in the foil after an adequate period of ultrasonic exposure. ((varies from 40 sec to a few minutes))
I tested my Audio Desk Systeme Vinyl Cleaner but failed the aluminum foil test.
How reliable is this test? The other question is how can I check that my cleaner is doing its job (refering to its ultrasonic property) in a more objective way.?
ditto
Post removed 
Had the 16.5, have the Audio Desk now and I'll never look back.


Great comparison.
Like " I was barefoot, have a pair of shoes now and I'll never look back"
If it did not fail the foil test it would probably ruin your record. Peoples who tried to build their own ultrasonic cleaner using ultrasonic tank have reported high frequency is missing even after one wash using the lowest setting.
Emailists, My process takes 20-25 minutes per side because I do the following:

1. AIVS #15 - 5 min.
2. AIVS Enzyme - 5 min.
3. AIVS Cleaner - 5 min.
4. AIVS pure water rinse - 2 min.
5. AIVS second water rinse - 2 min.
6. ZeroStat zap - 1 min.
7. Handheld Demag - 1 min.
8. New inner and outer sleeves - 1 min.

Of course I do both sides before steps 6, 7, and 8. I do this while reading emails and catching up on the computer which is next to my Loricraft station. I know it takes way too long and may be excessive, but the LPs sound better than when I had a shorter routine.

Tomorrow I will be taking a few of my cleaned LPs to my friend's house to compare with his Audio Desk. I plan to listen to 2 LPs, then clean them on his Audio Desk and listen again. We may or may not hear a difference. I will then take my recently cleaned Audio Desk LPs back to my system, listen and then clean them again with my Loricraft PRC4 and listen again to see if I hear a difference again.

I figure this way we will be able to hear them cleaned in reverse order in two different systems. I already know that the Audio Desk is MUCH more convenient. It may also clean better. I want to hear it myself under these somewhat controlled conditions to be sure.

I have found that records usually sound better after being cleaned a second time regardless of the machine used. That is why I plan to do the test twice in reverse order on the same LPs. There is the possibility that if I use two copies of the same LPs that they may sound different simply because of the different pressings and not because of the cleaning machines, which is why I want to use the same LP and clean it multiple times, reversing the order.

It will be interesting.
Benjie, I don't doubt your results. It is certainly possible that the ultra sonic agitation loosens debris in the grooves better than the solutions and vacuum. My comparison was very brief which is why I want to do a more careful one between the two machines. I bought my Lori when the Audio Desk was having initial quality issues. Those have clearly been resolved now.

I sometimes notice static in the Winter, but I immediately zap each side with a Zerostat before I put the cleaned LP into a new inner sleeve. So static is not an issue which effects the playback in my system.