TW 10.5 arm overhang set up?

Dear Luna: Here you have the precise information about setting overhang:

http://www.tw-acustic.de/media/bed-anl.pdf

and trhough the TW protractor you can choose for different alignment geometry set up: Lofgren, Baerwald or Stevenson.

Now, with the stylus tip in the point mark what you need to align is the cartridge cantilever. If the cantilever is straight on the cartridge then you can follow the instructions that say: cartridge body parallel. At the end what must be on " target " is the cantilever.

Regards and enjoy the music,
R.

Dear Rauliruegas,
It is the overhang measuring and I think I have got the
answer.

The manual says to point the marked line towards the arm's
pivot and it doesn't work. The arm tube needs to be parallel
with the marked line and the stylus tip lands on the point
where the arrow marked with 15.8 inches.

That should do it.

thanks.

If you want to align it accurate buy a mintlp protractor

I made my own "Mint" protractor using the Vinyl Engine resources to print on Card Stock. Came out perfect. Costs near nothing.

To Dgad,

"Card Stock", as in index card?

If so, just curious, how did you get the mirror reflection on this card?