Walker EST Silver treatment?


Has anyone used this in their system, and if so did it make a difference sonically? I got a look at it Sunday at the Audio Fest in Denver, and I am definitely intrigued. Wondering if it is a worthwhile tweak.
arafel
It also works great on cartridge pin/clip connections, but you'll probably have to slightly readjust your tracking force to compensate for the added mass.
I just put SST on the internal speaker/wire connection to my lower bass and what a diff.!Im going to treat the midrange and tweeter too,really tightened up the bass!
Here is my question.Do you need to re-apply it every so often or is is one time application?
Thanks
George
George,

According to the instructions:

'You may connect and disconnect six to eight times before needing to reapply.'

John
George, there is no need to re-apply unless you disconnect. The effect of the treatment does not "fade" over time as long as not disconnected. While the instructions do say you may connect and re-connect multiple times (as John points out), pay attention to what you hear. Sometimes you do need to re-apply upon disconnecting/re-connecting. Lloyd has updated his instructions as follows:
"Before reconnecting, it is beneficial to take a used applicator with the SST wiped off (some will still be embedded in the applicator) and spread over the connector. This will help to distribute the SST that remains on the connector. If you reapply it, make sure there is not excessive SST on the connector. If there is, clean it as directed above before applying more." http://www.walkeraudio.com/sst.htm