Homemade sound panels

I guess the catagory would be 'broadband absorbers' or some such. certainly NOT tuned, i would use panels such as I describe to treat excess 'liveness' in any listening area. Placed on the wall between speakers, you may be able to modify the image.
My use will, again, be to damp out the first reflection point of each speaker, Magnepan 1.6s.
My first pass effort will be to make some panels on stands to move around and see....listen actually! If I can make a few specific improvments in image/staging while damping out the back part of the fairly long (25' or so) room, I'll call it quits. When I decide on location....maybe a 4 month project, I'll do a permanent mounting.
Owens Corning 703 is some kind of boiler insulation which has gained a decent DIY reputation in the audio catagory.
I suppose with only a little ingenuity, you could make panels in any desired shape or size. I'll stick to the 'as issued' 2'x4' and multiples of that.

Next step is to find some accoustic fabric....maybe a trip up to the fashion district in LA and see the sights. Since I share the space with spouse, I must consider WAF and even make new drapes part of the negotiations. You can't be too careful!

My panels frames are 5" thick wood frames with a pegboard divider recesed 2" into the frame.The front part has a 2x4 Metro diffuser(foam)inserted in it.Then the back is a piece 2x4'-2" thick OC705 inserted,& covered with a breathable casing to keep the fibers in..They will be mounted about 4" of the wall to maximize sound waves..What do you think??

Just my opin......I would lose the pegboard. Also, foam doesnt' transmit sound. the object is to either aborb, turning sound energy into heat, or to diffuse/reflect randomly. The 705 will absorb, since it is 'transparent' to sound. If you can't breath thru it, the foam will tend to reflect.
Mounting away from the wall is a good idea, it'll give you incoming and outgoing 'treatment'.
Again, just my opin, but I'd either make diffusors or absorbers. The local fabric outlet has a real open 'fabric' which would be good for covering 703/5 doing as you suggest, keeping the fibers in. Cover the whole thing in accoustic cloth and your there.

As a sidenote, an anachoic space is NOT what you want. I've been in a very dead recording studio and it is ...funny sounding..... Many normal audio 'q's are simply gone missing. Don't do that to your listening space.

Silicone around the edges of the pegboard or it might vibrate or, better yet, avoid it. The pegboard is the same as the wall that you're trying to get away from. If the pegboard were in front and not touching anything, that would be a membrane but not a good one.

The foam might be better aesthetically but it's less functional than double thick 705. For a single layer of 705, I would expect reduced effectiveness below 200 Hz. Double thick is fairly effective, with the air space behind, down to 100Hz.

Owens Corning 703..4-2'/2" thick...you can buy a 6 pack off ebay for under $100.00..works well if your handy with material covering