2. tech-talk
  3. 1227416784

Background noise problems

Hi,

I posted around 2 months ago on this issue, but like an idiot, I was due for vacation in Bali a few days after I posted and missed most of the conversation. Anyways, I have tried a few more things and was hoping for some feedback....

Here is my situation: I am getting upper-frequency "snow" coming out of my speakers. My current setup is a Gold-level McCormack DNA-125 amp, Herron VTSP-1a/166 preamp, and Sony 9000es CDP that has been upgraded to VSE Level 6, with Tyler Acoustics Linbrook Signature speakers. Except for the snow that I am getting (sounds like a snowy TV) the system sounds great. Unfortunately, I am hearing the hiss around 20 feet away.

Here is what I have tried so far:
1) substituting a Eastern Electric Minimax preamp for the Herron: less of the hiss sound, but still present. I am assuming the preamp has less gain?
2) Substitute a Consonance CDP for the Sony. Not much change in background hiss
3) substitute a Jolida integrated amp for the Herron/McCormack combo, input from the Sony: this virtually eliminated the hiss

I have had the Herron checked over by Keith, replaced tubes, and everything has checked out. The McCormack was recently upgraded, but it is possible something is wrong there. The Sony unit was also recently upgraded from Level 5 to Level 6, but the hiss was there before the upgrade and still remains.

A few notes: I hear the hiss as soon as the Herron is engaged, whether or not it is receiving an input. The hiss is the same on all inputs, whether or not they have an active input or are not connected. The speakers are basically dead silent when only the amp is engaged.

It makes me think that I have some issue with compatibility in my system with the Herron, but as I am still getting some background noise on the substitute preamp, I am wondering where to go from here. The Jolida intergrated was basically quiet, which is a good sign.

Where should I go from here? I have the makings of a superb-sounding system, but need to get rid of this background noise. It can be heard easily in the music. Thanks in advance!
dawgcatching
dawgcatching OP
139 posts
 
Thanks for the note. I will call McCormack again and see what they say. Another user (4yanx) has my McCormack/Herron setup and loves it. I sent him an email to see if he had any of these issues.

I also saw that Stereophile bit about the high voltage gain on the 225. I don't know if the 125 is the same, but I will ask.
mlsstl
1,438 posts
 
The reports I found gave the same voltage gain (30 dB) for both the DNA-125 and the DNA-225.

It will be interesting to see what you eventually find.
dawgcatching OP
139 posts
 
Thanks. I spoke again with SMC, and they said I was doing the IC test incorrectly. What he suggested instead was that I take the units to my workplace (out in the woods, a resort that has very clean power most likely, as there is power to vacation houses that are empty this time of year). I wanted to try it away from town and any RFI interference that perhaps would be an issue, and this area is pretty remote.

End result was that running through my monitors at work, I had the same issues with the preamp and amp engaged. So, I know it isn't my house electrical nor is it RFI.

As a test, I took my work amplifier home and hooked it up (Arcam A75). It is DEAD quiet, and I am listening to it right now. And, the Arcam has pre-outs, so I hooked those up to the McCormack again. Voila-dead silent.

There is some incompatiblity issue going on here between the amp and preamp. I have had the unit checked out by Keith Herron 2 times in the past 6 months (including the 1a/166 upgrade) and he couldn't find anything wrong. I will give him a ring and see if there is something else that he can think of, some reason why this pre isn't working with the amp. I have picked both his brain and the guys at SMC, and nobody has yet figured out a reason why I would be having this issue.

Thanks again for everyone's help. I will let you know if I ever do find out what is wrong with my pre-amp combo.
dawgcatching OP
139 posts
 
Hi all,

Well, I have more or less figured it out. Due to the sensitivity of my speakers and amp, combined with some noise induced by tubes in general (something ambient in this area that tubes are picking up) a tube preamp is basically out of the question. Every tube pre I have tried just hasn't worked out. I am extremely frustrated right now, but at this point, it is time to step back and look for a good SS pre, or a dead-quiet tube pre (I hear the Dehavilland Ultraverve qualifies on this front).

Thanks to the forum for helping me out, and Keith at Herron and Steve and Kris at SMC Audio for helping me to isolate the problem.
More to discover