Cleaner for volume control

Possibly you won't even need a spay. Just rotate the control to and fro all the way from lift to right and vice versa for about 10 times with the unit switched off and the noise might go away. By rotating it, you'd have a chance of removing minute traces of oxidation on the contacts which probably are causing that noise.

You could try WD-40 (which is all-purpose good for anything stuff). I have used it in a pinch. But a better idea is control/contact cleaner from Radio Shack.

IMHO Caig would be preferable to WD40

Get the spray, use the little tube and be sparing

This should do the job http://store.caig.com/s.nl/sc.2/category.293/.f

Better get a local electronic shop can change the potentiometers , the replacement potentiometers are easy to source you may even upgrade from companies like Goldmoint, Tkd, Dact...unless your volume has remote then replace like for like.

If a This should do the job http://store.caig.com/s.nl/sc.2/category.293/.f

Better get a local electronic shop can change the potentiometers , the replacement potentiometers are easy to source you may even upgrade from companies like Goldmoint, Tkd, Dact...unless your volume has remote then replace like for like.

If the This should do the job http://store.caig.com/s.nl/sc.2/category.293/.f

Better get a local electronic shop can change the potentiometers , the replacement potentiometers are easy to source you may even upgrade from companies like Goldmoint, Tkd, Dact...unless your volume has remote then replace like for like.

Tim