ok so send him the drivers i am using with the spex and he will make the crossover me? That would be awesome:)
what ohms would I have?
if i am building a center channel with the follow speakers:
2 woofers 4 ohms each
1 mid 4 ohm
1 tweeter 6 ohm
if i run them off of the following 3 way crossover what is the correct way to hook it up? series for the woofer or parallel?
This network is an excellent choice for high power 3-way systems. The woofer section rolls off 6 dB at 800 Hz while the tweeter section uses a 12 dB per octave roll off at 4,500 Hz. The midrange section uses a true band pass filter with a response of 750-5,000 Hz. 12 dB per octave roll off. All crossover frequencies are rated into a 8 ohm load.
2 woofers 4 ohms each
1 mid 4 ohm
1 tweeter 6 ohm
if i run them off of the following 3 way crossover what is the correct way to hook it up? series for the woofer or parallel?
This network is an excellent choice for high power 3-way systems. The woofer section rolls off 6 dB at 800 Hz while the tweeter section uses a 12 dB per octave roll off at 4,500 Hz. The midrange section uses a true band pass filter with a response of 750-5,000 Hz. 12 dB per octave roll off. All crossover frequencies are rated into a 8 ohm load.
- ...
- 8 posts total
- 8 posts total