2. tech-talk
  3. 1281434803

Best caps for updating my VTL 225 mono's ?

My VTL's have the original VTL input caps; they sound nice, but they are almost 20yrs old. A friend suggested replacing the input caps as the best way to improve their sound. VTL offers the MIT cap upgrade; my friend suggests Sonicaps Platinum. The job will require 16 X 0.47 mF 400V caps, and the Sonicaps Platinum will be too expensive. I appreciate any suggestions...Dynamicaps, MIT RSX, Sonicaps GEN I/II, Mundorf? I favor a smooth, rich, "organic", sound over a harsh, clinical sound. Also, how about suggestions for sourcing the replacement caps? Thanks so much!
lstnup
magfan
1,583 posts
 
Right you are, face.
I should have noted that and made the point that differences DO exist and they are not trivial.
I'm looking at the Clarity SA for my crossovers....with a .01 bypass on the HF side.
johnsonwu
469 posts
 
Coupling:
Smooth + organic: V-Cap Teflons (yes they are that good
and if you want a glimpse of that sound on a tight budget try Russian FT3s, which has a similar signature but not quite @ VCaps level)
Rich: Russion PIO
Organic: Jensen Copper oil
open but light-bass: Mundorf silver oil

High Voltage:
VALAB 47uF 500V and parallel them to get about half the value
you got in the ELNAs in the input and driver stage.

Power supply for output tubes...
size consideration and fitting means u need to use the
same old large cans, Nichicons and Panasonic need not apply.
magfan
1,583 posts
 
UH? When caps are paralleled don't the values.....ADD?

You are sort of correct for resistors.....correct if resistors are the SAME value.
More to discover