Most effective Room Treatment for slap echo, etc

Thanks, JD.
I live down the street from UFO (fabric store) and they have some burlap which just makes me itch to look at. They have exactly 1 fabric billed as 'grill cloth' which is ugly.
They DO have a VERY light / open weave fabric in white which I'd use as a liner if I ever went with something like OC703.

I live an hour+ train ride from LA and another 20" bus ride to The Garment District which is hours of just walking....fast. One day I'll migrate up there for a look-see. I understand there to be whole block of nothing BUT fabric.

On the way? Stop at Phillipe's for a french dip and some pie. yum yum.

Your Constraint: “Easily removable adhesive so as not to strip the paint or stucco.” -> This may limit the weight of what you can hang on a wall which is correlated to acoustical thickness, generally speaking. Because the popular fiberglass filled resistive-type absorbers should be a minimum of 4” thick (with 6” being better) and an air space of another 6”, the total depth is now quickly approaching what a bookshelf depth would entail. So you might need to place acoustical treatments where you can afford them to stick off the walls which may be your front and back walls, presumably, and use thinner devices for the side walls and ceiling.

Your Need #1: “Eliminate slap echo.” -> Luckily, slap echo is more of an upper frequency phenomenon usually above 1kHz so it takes thinner treatments to deal with it than lower frequencies. Have someone stand by each speaker clapping their hands while you sit in the listening position to see if you can hear the slap echoes and then try placing a thickly folded or rolled up towel at various positions along the wall and repeat the clap-listen tests until you’ve found the wall position where the slap echo is minimized. Then replace the towel with something more permanent to break up the hard parallel surfaces. A tapestry or thick drape was suggested and will work well. If you have some art work / pictures on the walls, then try placing a tennis ball between the wall and the bottom of the picture to angle the picture upwards. You might consider the lightweight RPG Skyline diffusers that are 2’*2’ square which can be hung with Velcro or sticky tape and shouldn’t damage your walls/ceiling.

Your Need #2: Improve focus and imaging. Reducing the indirect reflections by eliminating the slap echoes will help drive the ratio of direct-to-indirect reflections higher and help with focus and imaging. So too will listening in a near-field arrangement and toeing in your speakers. Try absorption on the front wall to attenuate the damaging reflections coming from there – the absorption should improve the perceived soundstage depth.

Lastly, a little education on room acoustics will go a long way. Try picking up Dr Floyd Toole’s latest book and F. Alton Everest’s textbook and plough your way through them. In the long run it’ll help you assess your needs, the quality of manufacturer’s products and help with knowing what to place where.

Good luck.

Thanks to all members for their suggestions and recommendations. I appreciate you taking the time to respond. Hopefully, I will be able to eliminate the acoustic problems mentioned above by your input. Jim

It looks like this thread has ran out of gas. Nevertheless,I checked with Gikacoustics and Ats acoustics. Gik provided more informed advice and a AT plan for my room, but the price with shipping is too expensive . Though, I did move the speakers to the long axis and moved my couch out about 30 inches from the back wall as recommended by GIK---the sound did inprove in "some" areas. However, I noticed something today that might have an obvious answer. On louder passages of music, there seems to be less clarity, and also more noise, that is, congestion of the sound. Someone may advise: "Turn it down you are playing it too loud"....OR, is the amp clipping, or is my amp Creek SE5350 Classic coming up short in terms of dynamics?? One more point, it also seems that the room is amplifying the sound or making it louder... Need some input. Thanks again Jim

Have you done any of the things I suggested?