Preamp repeatedly blows fuses

I assume the fuse you replaced was on the outside of the unit.
That would be the line fuse. Open the unit and see if there is an internal fuse maybe mounted on a circuit board. If yes check if it has blown and if it has replace. If it blows again you can contact Divergent Technologies for help. They are ASL reps and helped me troubleshoot my Hurricanes

Th fuse I replaced was the line fuse. after a thorough inspection, I couldn't locate any other fuses on the unit. Keep in mind, this is an ASUSA product, not an Antique Sound Labs product. If memory serves, ASUSA was bought out by ASL. It's a pretty complex design...everything is through-hole and point to point with not much spare room inside the chassis. I did the old "sniff" test and smelled nothing "burny" inside. I also tried my best to find a bare wire shorted to the chassis, or a tube socket...but I just couldn't. I'm going to call Music Technology here in VA, they are about 15 minutes south of me and I'm sure they can help.

Keep the suggestions coming, though :)

Evan

Just asking, but did you disconnect all inputs and outputs? This way you will be sure that another item connected to your preamp is not causing the fuse to blow.
Maybe you have a shorted interconnect.

I did disconnect everything, and isolated the preamp on a different outlet in the apartment.

Luckily I dropped it off at Music Technology this afternoon and Bill set me straight. Hopefully in a week or so I'll have it back and better than ever!