Different things cause listening fatigue for different people. There's no universal answer as to what's causing your's.
People get carried away with cables. I definitely hear differences in them, but none that ever transformed a system by any means. Mogami makes very good stuff, so it's not like you've got something butchering the signal, emphasizing or cutting something, etc.
I think there's a little bit of burn in in amps and digital sources, but very little IMO. If it doesn't sound right after a day or two, I don't think it ever will. I'm a firm believer in warming up stuff though. My old Theta DAC would sound awful when it was cold. Very harsh and distorted in the highs. If it was unplugged for more than a few days (no power button), it would take almost a full day to sound right again. I've never heard it to that extent with any other component. My integrated amp (Bryston B60) takes about 45 minutes of playing from a cold start for the magic to happen. Once the knobs are warm, the music flows.
I'd say leave your gear on for a day or two without turning it off. It doesn't need to play constantly.
It could also very well be that the increased clarity from the preamp has shown you a flaw elsewhere in the system.
Have you played around with the volume level of the speakers, or more importantly the Squeezebox? Perhaps one of them is causing an imbalance. Not sure if the Squeezebox outputs bit perfect at 100% volume or somewhere less than that. If its less than that, it could be adding bits to go louder. Alternatively, perhaps the Quads are being a bit overdriven by the preamp, and the Quads need to be turned down just a tad.
Last thought... Have you played with speaker placement? Perhaps the increased clarity has shown a flaw in that.
Just some thoughts. I'd start with fiddling around with the volume adjustments. If all else fails, borrow some gear to swap in and out.
People get carried away with cables. I definitely hear differences in them, but none that ever transformed a system by any means. Mogami makes very good stuff, so it's not like you've got something butchering the signal, emphasizing or cutting something, etc.
I think there's a little bit of burn in in amps and digital sources, but very little IMO. If it doesn't sound right after a day or two, I don't think it ever will. I'm a firm believer in warming up stuff though. My old Theta DAC would sound awful when it was cold. Very harsh and distorted in the highs. If it was unplugged for more than a few days (no power button), it would take almost a full day to sound right again. I've never heard it to that extent with any other component. My integrated amp (Bryston B60) takes about 45 minutes of playing from a cold start for the magic to happen. Once the knobs are warm, the music flows.
I'd say leave your gear on for a day or two without turning it off. It doesn't need to play constantly.
It could also very well be that the increased clarity from the preamp has shown you a flaw elsewhere in the system.
Have you played around with the volume level of the speakers, or more importantly the Squeezebox? Perhaps one of them is causing an imbalance. Not sure if the Squeezebox outputs bit perfect at 100% volume or somewhere less than that. If its less than that, it could be adding bits to go louder. Alternatively, perhaps the Quads are being a bit overdriven by the preamp, and the Quads need to be turned down just a tad.
Last thought... Have you played with speaker placement? Perhaps the increased clarity has shown a flaw in that.
Just some thoughts. I'd start with fiddling around with the volume adjustments. If all else fails, borrow some gear to swap in and out.