Another Next Best Tweak

Thanks for the additional information. Jejaudio, are you saying that I can just place the magnet on the outside chassis cover?

Ozzy: Look at my system pictures. I just took some pictures of the Neodymium Magnets I use.

Yes you can place them on the outside chassis cover. I have posted a picture of a handful of the Neodymium Magnet that I have. They are all taken from computer Hard-Drives.

Some are larger than others, but they all are super strong, like you said. I have dozens of these Neodymium Magnets.

BTW you can cleanly break the Magnet from the steel plate by using two channel-locs pliers, and bending the steel back plate on each end to separate the glue holding the Neodymium Magnet. You will hear a slight pop

I like to leave the steel back-plate on, because the flat magnets are to much work to remove. But you can slide them on the chassis of your gear. I guess most would not want to do that for fear of scratching the equipment.

Jeaudio, Thank you for your response. I'm going to give it a try this evening on my Amp.

Back to my original post, and to respond to Rrog comments, I have taken the magnet's on and off the speaker cable as you suggested. The result???
Well, I'll be "dogg on" if there isn't more dynamics to the sound with the magnets.
Now, my speaker cables are DIY with only oversized Teflon tubing used as a dielectic so perhaps that is why the magnets seem to work so well.

Ozzy,
I have tried neodymium magnets on all components that have a transformer -- on the outside of the chassis. The results have been uniformly good -- as well as on the MPCs. There are forums that talk about how people magnets in their systems. If you look for these forums you may find some useful information.

I just tried this magnet tweak on my speaker cables. It works just as good there as it does on my power amp.Like you said Ozzy, the dynamics are better.The bass is deeper Thanks for the tip