Cartridge rings at certain high frequencies


Hi all, I am new to the forum, and this is my first post. First my system, mainly vinyl based and consists of Linn active Amps & Speakers, with a Michell Gyro modified with the Orb platter, plus an SME 309 arm. Phono pre amp is a Graham Slee reflex C, cables are Nordost. Cartridges are various, but exist on all of them, currently an AT33EV MC.
On certain high frequencies I get a ringing sound, a sort of harmonic, but not truly a harmonic sound. It's not on all albums I play, such as all my 180gm, but shows up on a lot of the 120-140 general vinyl. So far I have tried the following. Checked the arm and cart every setting at least fifty times, so much so I can now set the Azimuth blindfolded and asleep. I thought it was my music room, so in went the rugs, carpets, cushion, sound defuses, traps etc. didn't make any difference, it was still there. The TT does have DensoDamp fitted and the SME doesn't ring at all. The only thing that hasn't been changed is the cable......so I have bought a lot of Linn cable to try, but first thought some of you kind people may hopefully tell me of something that I have missed.
I do have a DS player, not that is used a lot as vinyl is my prime listening pleasure, and I occasionally get the slight ringing, but not as prevalent as with my vinyl setup. Thank for reading and thank you for any assistance that you can provide.
Brian in the UK
brianev
thats not tinnitus.It certainly sounds like a harmonic resonance. The source may be external to your system... i've gotten that effect from having a guitar or harp in my listening room and I've seen it elsewhere with a snare drum in the room.
Hi, thanks for the reply, I intend to take all my kit apart over the weekend, and the put the new cable into the system, that's if my BFA connectors turn up. I will also remove everything that can resonate, and put in some sound damping things. Then listen and see if there is a difference. A question if I may? Is there a method for finding out the direction of a speaker cable? I know lots of cables do have arrows and markings in the sheathing, and listening is another way, but what if the manufacturer has the arrows wrongly placed? Some manufacturers only put direction arrows on the heat shrink, and if these are wrong, can it be checked without taking everything apart? Thank you all for the help its greatly appreciated.
Regards
Brian UK
Hi, possibly it could be but I doubt it, and I do suffer from it, but it isn't the same. The tinnitus I can switch off in my head, but this sound is totally different I think? I am due a check on my ears sometime this year, so will ask the question, thanks for the post.
Regards
Brian
You are probably hearing a standing wave caused by not having the speakers working together. "Master Set" would help this and give you a very much improved musicality to boot.

Rod............