2. tech-talk
  3. 1367883047

Tweak you gotta try. Post your results...

Well I read some reviews about the new High Fidelity cables that were designed by the former owner of Virtual Dynamics. They seem to be using magnets as their claim to fame in their design.

I happened to have some rod type axially magnets that were about 3/8" in diameter and about 1" long. I installed 2 of them near the end of my speaker cables near the speakers. 2 sets are needed for each speaker wire left and right).They are installed so that the magnetism is pulling through the cable.

It is quite interesting, but I would like some others to try this and share their opinions before I comment.

I also added a set at the Amp end.These magnets cost about $3.39 each and you will need at least 4 of them or 8 if you want to try them also at the Amp end.

I bought mine from http://www.amazingmagnets.com/show-fractional-r1000c.aspx

Make sure you select USPS for about $4.95 shipping otherwise you will end up paying for UPS at about $13 for shipping.
128x128ozzy
ozzy's avatar
ozzy OP
7,466 posts
 
I guess what I am trying to do is to get more people to try it. Because, the magnets definitely do something, but I’m not sure why?
With only the magnets at the speaker end it does sound like an improvement. Adding the extra magnets at the amp perhaps changes the sound too much.
At this point, I can't say if it’s an improvement in sound, but it sure is different.
Post removed 
csontos
1,311 posts
 
Are you kidding?
Post removed 
csontos
1,311 posts
 
I meant you're right on the mark. How can it not be audiophilia. You have my sympathy on the crystal. Here's a little secret; everything you're trying to achieve with external tweaks can be actually had in 'perfect channel balance'. It's that simple. How you achieve it is up to the sources you trust to steer you in the right direction. It's just uncanny that virtually nobody cares about the most important issue surrounding the very goal we're all attempting to capture. Amazing.
More to discover