Ethernet Wireless Hard Drive Music Server

Your maximum streaming rate from an uncompressed CD is 1.4 Mbps. Even the old 802.11b speed (10 Mpbs) is adequate so the g is more than fine. If you wish to play any of the lossy compressed file formats you're even better off since those bit rates tend to run from 128 to 320 Kbps.

Of course, this assumes two things. First of all the device that receives the music data stream should be buffered. This would allow momentary hiccups (due to other traffic on the connection) to be handled. The second item is that you are not running a massive amount of other traffic on the network. Of course, that could also interfere with a wired connection. However, I've got six devices sharing my home network and have never had an interruption issue while playing my SB3.

Thanks Mlsstl. My receiving end is my Mac Laptop with airport extreme, which goes to a Waveterminal U24 and then to my DAC, so it sounds like I should be fine. Minimal traffic at my house usually. I guess if it doesn't work the drive is also USB 2.0 so it wouldn't be a total loss. Thank you for the input.

Marco

I've been researching this. It would be nice if something like this worked, since the price is right, but I don't think this will be fast enough to do what you want, since you will be using the ethernet drive as a wireless server for your music, rather than just streaming from one computer to the airport (like airtunes over an airport express). I considered hooking up a 500GB USB drive to the new Airport Extreme (basically the same as what you're proposing), but I decided against it after reading several reports on the internet of people having trouble using the Airport Extreme as an iTunes server. If you are thinking about hooking up the external drive directly to the laptop, make sure you take into account hard drive noise.

Please let me know how this works out. Although I haven't pulled the trigger yet, the best solution I've found so far for a 500GB music library (with built-in backup and room to expand to 2.25TB in RAID 5) is to buy an Infrant ReadyNAS NV+ and hard wire it to a giga-ethernet router (10/100/1000) in a media/LAN closet. It isn't a cheap solution, but it is very robust, fast and secure.

Thanks for the input, Morris. I've been using external drives for over a year, both USB and Firewire, without a hiccup (well, one or two, but it's very rare and very brief). So that is not an issue as far as I'm concerned. I've been using Lacie D2 Extreme drives and the noise has not been an issue for me, though it is there it's pretty minimal. There have been some reports of drive failure, especially with the cheaper Lacie drives. My good friend had an Extreme drive fail on him. I've had good luck with them as have a few other friends. There are no guarantees, as I'm sure you are aware. The OWC (Other World Computing) Mercury Elite Pro drives have a good reputation, but the one I've heard is pretty loud, and I don't think they have an Ethernet version (they actually sell Lacie's drives for that).

As far as the Ethernet drive, again, thanks for that input. You certainly may have something there. There is, I think, one difference in that, and correct me if I am wrong, Airport Express uses the 802.11B convention, while my Aiport Base Station and Airport Extreme card stream info in 802.11G which is significantly faster. This is why it would be helpful to get input from someone doing exactly what I am proposing to do. So let me know if I'm off base, but there is that difference.

Thanks again for this, and any further input.

Marco