Cable for Lynx card to Berkeley DAC


Does anyone have information an a better cable to connect a Lynx card to a Berkeley DAC than the standard Lynx breakout cable?

thanks
128x128shaq
Earflappin - thanks for that info. Very helpful. I am seriously considering the Zalman + Berkeley as my venture into the world of hi-rez. The netbook for remote access sounds like a good solution, one that more and more people seem to be using. I'm wondering if one could buy one of those Zalman units (e.g., through Goodwins) with a built-in XLR output (i.e., have all the Lynx-to-XLR conversion happening internally over very short wires), such that you can just use your own high-end AES/EBU digital cable to connect the DAC.
As for the XA30.5, it sounds like you have a nice solution for the "bass issue". I have full range floorstanders, and I haven't tried this amp in my own system yet to see how things work. But having listened to a XA30.5 at my local dealer, it is clearly the most musical solid state amp I have ever heard (from mid-bass on up) for under $10K.
Earflappin - one more question: Could you elaborate further on how you set up the remote netbook (e.g., what extra software was installed on the Zalman, also what playback program does your Zalman use?). Thanks.
Ral,

The Lynx card only has the HD26 pin out, therefore, your best single cable solution is a HD26-to-XLR cable. Otherwise, you're talking two cables - one to convert HD26 to XLR and then an XLR-XLR cable. Of course this would degrade sonic quality since you have multiple connectors in the signal path.

If you are the least bit handy technically you can save big $$ by buying the components for the Zalman yourself. That's what I did. It's pretty simple to install the motherboard, Lynx card, memory, optical drive and SSD or spinning driver yourself. But you do need to know your way around WinXP and be comfortable assembling hardware. Goodwins is a class outfit so that's the way to go if you want one pre-built.

My netbook runs WinXP Pro and it comes standard with Remote Desktop Connection. You just run it to connect to the Zalman. You need to set up a domain and a password, but that's easy.

In terms of playback software I use Samplitude as I've found it sonically superior to all the other programs. However....!!!...it is a pro piece of software and only plays one song at a time so it's not for everyone. I also load my music files into a RAM drive as it sounds better than having them pulled off the SSD. Also, solid state drives (SSD) sound better than spinning drives. Again, these things may not matter or be audible in some systems so to each their own. If you want maximum convenience and user friendliness than MediaMonkey is a good choice as a software player. I would not use iTunes.