2. pc-audio
  3. 1372897080

Ripping LPs to Hard Drive

I'm want to use Audacity to rip my records to hard drive, but I have a problem. The signal input level is too low. I have the "gain" slider in the Audacity program maxed out, and the gain level on the line input of my sound card is maxed as well. I was hoping to get signal levels to about -6db but the meters are topping out at about -24db. What can I do to give the input a bump?
danoroo
bondmanp
1,824 posts
 
Also - check the back of the Yammi for a switch that would change the level of the phono inputs. Some amps allow you to set the phono inputs to hi-level so you can use them as another auxiliary input if you are not using a turntable.
gandra
2 posts
 
As a worst-case scenario, just record the signal as is and amplify it later with the Audacity built-in function. This might not be adviseable for such a weak signal (-24 dB), but I'm guessing that you will be able to find a way to at least get to around -10 dB by using some of the above suggestions.
Good luck
orpheus10
8,668 posts
 

Danoroo, you got a lot of homework to do. I suggest you read everything on the subject you can find here on past conversations about the same subject.
bondmanp
1,824 posts
 
Or, you can do what I did. Give up on computers and buy a stand-alone CD recorder. This might not fix your level issues, though. It sure fixed my computer issues. I use a Marantz pro-sumer recorder with pretty respectable results.
happycamper
16 posts
 
http://www.lynxstudio.com/product_detail.asp?i=59
More to discover