Cheap tweak from Virtual Dynamics:

Tom,
Can you share what Rick recommended as far as using magnets instead of fuses in your system? This is intriguing.

Several years Rick came on these pages saying that the use of use of magnets in and around electronic circuitry was of great benefit. He got pushed around and laughed at as a result. He now uses magnets in many of his upper end designs. With more to come along. I used one magnet in a friends system, replaced the line fuse in his Bat 31SE preamp. The difference was huge and immediate. Now when music is played in the room his birds come down off their perch and sing and dance to tunes he has played way to many times before. Toe tapping I suppose. Sounds crazy but I've been there many times before. Maybe Rick will chime in to say why magnets work so well. Tom

My speakers are Reference 3a Dulcet. I e-mailed the main man, Tash, at Divergent Technologies and attached the VD video. He emailed me back telling me that the video was interesting and that it made sense to him. Tash asked me to run my personal tests with the brass screws and torque tests. I followed up telling him how the brass screws made a nice difference and explained to him how I came to fine-tuning the torque to achieve the best sound possible from the Dulcet. I suggested to him that he try his own tests in the factory and asked him for his results. So far, no answer from him. We'll see. I feel that this is a very good tweak and the laws of physics are in play here. I'm no physicist, but I'm thinking that the proper torque somehow is related to the screws matching the resonation of the cabinet with the speaker drivers. Perhaps someone can explain this phenomenon. It's obvious that the brass, being non-ferrous, doesn't negatively react with the driver magnets and brass has good drain-resonating characteristics. Help me here, tech guys.

The bass driver of my mains and its crossover both have resonance control brass tuning bolts that do make for a obvious change when tightened or loosened. My amps also can be tuned in a similar manner. Vibration can be given direction. Tom

The screws that matter most are those that hold the diaphragm and voice coil in place to the magnet assembly and face plate. The ferrous screws do just that, they screw with the field of flux as the coil moves back and forth in the gap. So the smallest speaker with the smallest coil is held in place with ferrous material at the closest distance to the motor assembly. Replace those screws one at a time that hold the dome in place. All of these that I have ever replaced have been metric size. Tom