Cheap tweak from Virtual Dynamics:

Tom, besides switching to brass screws for your drivers, have you experimented with the torque? I'm curious what the proper torque should be for those inner screws for the tweeter, or maybe it depends on the type and brand of tweeter. I recall finding a thread on AA how the Merlin speaker driver's screws are properly torqued at the factory and some owners check for torque maybe twice a year. I remember that the inner screws on the tweeter are torqued higher than the outer screws.

Torque would indeed be a factor. As I said my bass driver,crossover and amp are tuned ..by ear. I have not recorded the settings by torque measurements but by ear and then recording the postion like the hands on a clock. During shipment of any device that is "tuned" at the factory the tuning will change in transit to the end user. The tuning will also "relax" with use. Retuning may also be required with changes in cables, electronics, tube brands and room acoustic additions. Increased resolution as I found with the addition of the modified Altmann Dac, D-Clock, PS Audio transport all AVM treated and Rick's magnetic replacement fuses made for quick apparent retuning by ear. Yep that feels right! Now sit down and enjoy. Right was obvious. Tom

Tom,
I understand the tuning by ear. Although I was experimenting with the torque using a screwdriver with a torque setting, I could hear the difference with each incremental setting. All this tweaking with the brass screws and proper torqueing not only puts the soundstage into perspective, but the best tone, timbre, and dynamics are also achieved when the setting is "just right".
Currently, I am using some heavy metal stands filled with playground sand. My floor is a concrete slab that is carpeted with a 1/2" foam padding under the carpet. The stands have basic cheap steel spikes that came with the stands. I am considering buying some Audiopoints, but I have read that the Audiopoints are more effective on a wood floor. I am de-coupling my mini-monitors from the stands with squishy isonode feet.