bill_k
Responses from bill_k
| TT set up question Inner groove distortion can be caused by misalignment of the cartridge or incorrect anti-skating. The alignment and overhang settings should be checked with an appropriate guage that is usually supplied with the tonearm. If you notice that the dis... | |
| Does anyone know about Sphinx amplifiers? May Audio appears to be the US distributor for Sphinx.I have no other knowledge or experience with this line,but I thought this would be a good source for details...May Audio | |
| Cart for VPI Scout? Blackbird, Ruby2H, Shelter 901 I recently setup a Super Scoutmaster with a Dynavector17D2 cartridge and the P-75 phono stage. I checked withthe Dynavector distributor, and he said that the P-75 isbest matched with the 17D2 in the phono enhancer mode atthe high impedance setting... | |
| Ever hear the "Maggie Scream"? I recently had a discussion with an owner of some Piegaribbon speakers that experienced the same problem thatyou're describing. I noticed that you have Outlaw poweramps, and that happens to be the same brand of amps thathe uses! I'd be pretty cert... | |
| Rega Arm lift? This is a common "problem" with Rega's cueing mechanism.It can usually be overcome by only moving the lever to justpast its vertical position and then letting the lever lowerwith the tonearm. If the arm still won't lower using thisprocedure then t... | |
| Have you ever had this problem with a Rega P-25? If you're lowering the lever all at once, try just lowering it past its vertical position and then letting it fall on its own. Rega recommends this, and it should work unless your arm has a defective cueing mechanism (which can be replaced if need... |