dwette
Responses from dwette
| Rockford Fosgate Signature Phono Pre needs repair Try contacting Musical Surroundings. They are the former distributor for the Fosgate Signature. I once had a Signature V2. It ended up with right channel problems that never did get fixed correctly. I ended up getting a full refund from the deale... | |
| Thoughts On Turntable Clamps And Weights @mijostyn OK. I got that one, for a couple bucks. If I put my iPhone on the platter and bang on the isolation platform I get tiny little blips (like small bubbles). If I bang on the rack the isolation platform sits on the tiny blips are even tini... | |
| Thoughts On Turntable Clamps And Weights @mijostyn who's the app publisher? There's more than one fitting your description. The one I got comes up as "Vibration Meter, seismograph": "Measure all vibrations" by ExaMobile S.A. | |
| Thoughts On Turntable Clamps And Weights @mijostyn What app do you use (I am on iPhone) I picked something off the app store, and vibration seems negligible to be. During normal play it says vibrations can only be detected by instruments, and if I bang on the isolation platform with the... | |
| Thoughts On Turntable Clamps And Weights @pindac My wall shelf will be mounted to a plaster on brick wall. I will drill into the brick an fasten the appropriate anchors, readily available form the local hardware store. I have done this before. As an extra measure I also glue the anchors ... | |
| Thoughts On Turntable Clamps And Weights At the moment I have my TT on an isolation platform, and that one will just have to do for now. It may not be a perfect solution, but it's good enough. I listen to a lot of large scale orchestral music and hear plenty of inner detail, and the soun... | |
| Thoughts On Turntable Clamps And Weights @mijostyn Thanks for the info. My turntable is a non-suspended design. At some point I will try a Harmonic Resolution Systems (HRS E1X) isolation base for it. Those are tuned for type and weight of component, but it won’t work with my current set... | |
| UPS Driver Literally Drops Package with New Hana Umami Red If a carrier dropping a well-packaged component that ends up fine anyway burns your butt, then maybe you should consider supporting your local B&M dealer instead of buying online. Just a thought. :) | |
| Thoughts On Turntable Clamps And Weights I wonder what a Panzerholz isolation base would be like, with the proper feet? I have a isoAcoustics Delos 3" Maple platform I use for the Innovation. Technically I have exceeded the weight limit for it by about 8 lbs, but I don’t have any isolati... | |
| Clearaudio Magnify tonearm- replacing anti skate wire. I agree. Just send it to Clearaudio for proper repair. I forgot all about the Magnify anti-skate adjustment. I hated it, and it was marginally better than the one for the Clarify (under the arm board). I had both arms and no longer have either - ... | |
| Thoughts On Turntable Clamps And Weights @pindac As you can well imagine I am familiar with the Panzerholtz material. Both my Innovation Wood, and the Ovation I had before it have Panzerholtz plinths. Clearaudio's Statement clamp has a Panzerholtz base, but as I recall it is now $1200 U... | |
| Thoughts On Turntable Clamps And Weights @pindac Since the subject of composite 1 kg clamps interests you. Previously I used a Harmonic Resolution Systems (HRS) ADH clamp. That one is 850 gr., made of stainless steel with a rubber composite base. In contrast to the Ultra Carbon TC-40 I ... | |
| Thoughts On Turntable Clamps And Weights @pindac My 1 kg center clamp is a Monarch Systems Ultra Carbon TC-40 clamp. It's a combination of stainless steel and carbon fiber. | |
| Thoughts On Turntable Clamps And Weights It’s impossible to generalize about clamps and weights for turntables. It depends on the turntable. Some are designed to use them. Some will end up with destroyed bearings if you do where the weight is too much. Some motors will struggle with the ... | |
| Turntables: 2 Tonearms. What do you Have or Know About? My Innovation arrived yesterday. I started setting it up last night and got it dialed in today. Really enjoying the upgrade over my Ovation. Second cartridge for the 9" arm is due in a few weeks. |