dylanthecat
Responses from dylanthecat
| Any Bluesound Node2 owners Hi, I have four Node2i. In all cases I use external DACs and upgraded power cords. In addition one unit (to date) has been modified with a PCB DC power interface and a linear external low noise PSU. All these are a step up in SQ over SOTS. I use t... | |
| B&W DM70's - top end lacking Hi Ian,I have downloaded a few apps that were recommended on the internet. They appear to largely correlate with each other.I am not seeing any obvious concerns. There is a very minor dip at 35Hz though it is very minor indeed. Nothing to cause co... | |
| B&W DM70's - top end lacking Hi Ian,What meter are you using? I do have a vintage frequency generator but not a meter.I know that there are several apps available.Many thanks, Martin | |
| B&W DM70's - top end lacking Hi Ian,The other foams have arrived. They are the correct size. I will probably change them over at some point in the near future.Best regards, Martin | |
| B&W DM70's - top end lacking Hi Ian,Rather than 'stuffing' I have used quilting in 25mm thick blankets therefore I have been able to apply to the inside faces and as gravity drop acoustic curtains directly behind the driver. As a mass/ volume I would estimate that I have now ... | |
| B&W DM70's - top end lacking Hi Ian,I brought my DM70 through AoS as 'not working' for only £100.I have had great difficulty getting hold of natural lambswool quilting. The material that I have used came from the thermal insulation that Completely Fresh previously used in the... | |
| B&W DM70's - top end lacking Hi Ian,I have ordered those other foams as a spare. Thanks for the link.Have you changed your drivers over to eliminate the crossover?Have you changed the speakers overs to eliminate the amp outputs?Does it sound like metal hitting a dense hardwoo... | |
| B&W DM70's - top end lacking Hi Ian,I have reformed the bass drivers with the Dutch oversized 12" foams. Though tight, they are just large enough and a great sonic improvement over the felt DIY surrounds.I have removed the cotton gauze and all the damping. This has been repla... | |
| B&W DM70's - top end lacking Thank you ISCM,I have the adapter plate with the EMI bass driver. I have ordered a pair of foams from the Netherlands that were the closest match I could find. Hopefully they will arrive today. Fingers crossed there.I do have a pair of the Richard... | |
| B&W DM70's - top end lacking Hi, I should have clarified that mine are the Continentals.I note the previous comment about suspended wooden floors, I will place them on some marble slabs.I am located only a few miles from both the Stenying and Worthing factories though they of... | |
| B&W DM70's - top end lacking Hi, new to the site.I have just picked up a pair of DM70. The ESL sound very good but I suspect that the energiser units needs some caps replacing.The bass drivers have green felt DIY surrounds that are not helping in that department. If anyone ca... |