128x128

jonoulman

Responses from jonoulman

Best beer
I'm a big fan of the Belgian farm house style beers such as those made by Sasion Dupont. They even have a "Table Beer" which has only 3.5% alcohol that they recommend starting your whole family drinking with. These beers are yeasty, malty, with a ... 
Maggies moved 6 inches...big improvement
I realize I'm chiming in on an ancient thread here. I hung a pair of Tympani 1C with a "center mono tweeter" (left over after I replaced both when one blew) from the ceiling in an old warehouse space. 15' heavy wooden beamed ceilings. Hanging bass... 
DIY Speaker wire
Hasn't shown up yet. Just ordered yesterday. It looked to me that each of the (2) wires had an awg of 10. Will post when they arrive 
Need a heavy duty receptacle
Yes. I love amplifiers and vintage gear so mono-blocks and bi-amping leaves me with a load of power cords that can be tweaked. They tend to be spendy purchased so I make them with off the shelf parts. These guys take it a bit farther than I do but... 
DIY Speaker wire
Ngjockey, I just ordered 4 sets of your silver plated copper wire to run in while I braid 750 feet of solid core (THHN thanks Grannying and Mechens!) I'm thinking this project might just bE DIWF (do it with friends) instead of DIY.... 
Need a heavy duty receptacle
There are "twist lock" outlets and plugs ranging from 15amps on up to 240v 60amp for appliances. A good electrical supply will carry a selection. I used 3-20amp "twist locks" to power my rack of gear. I have them floor mounted, It weighs about 400... 
DIY Speaker wire
since I have to run 25 feet, might I braid a larger wire, say 12 awg? Also Since they are over a stone floor I thought I would put them into a "wiremold" floor raceway that has 5 tracks made of aluminum. What about polyester expandable sleeving? I... 
DIY Speaker wire
Mechans, What gauge solids did you braid? Am I to assume you braided 3 each per binding post? Again I am running these 24'. and there will be a set each split at 1200 htz. What of single wire 10 awg? 
DIY Speaker wire
I need to run 4 sets of speaker wire 24' over a stone floor. There is a fireplace between my speaker (best placement in my 1,100 sq' room) giving me that space behind the main sofa the best placement for my rack of gear. I have removed the passive... 
set crossover point and slope on an ARC EC21
Well, that didn't work. Dave said Hi Fi Sound doesn't sell or support ARC. Hmmm, anybody got ideas? 
set crossover point and slope on an ARC EC21
HiFi Sound did some repairs for me years ago. I'll give them a call tomorrow. Thanks,