likklegerry
Responses from likklegerry
| testing a crossover Hi Tim,so sorry i havent gotten back to you,ive been trying to to fix this problem online with another guy,but for me,my end,my laptop is very old and slow,and have been waiting to receive a new one from the UK,and it all takes time,living in Bul... | |
| testing a crossover where i have written" speaker terms with everything connected" ive written Hi and low, which means mid/high and bass,on the speaker posts,just to clear that.thanks guys | |
| testing a crossover ok i have uploaded my original readings,via a picture.later guys | |
| testing a crossover thankyou for that,some thing seems a miss,i do read 0ohms,i also found my orignal written values also this morning when i first started investigating all this,Tell you what,you guys have put so much time and effort into this,this weekend i am goin... | |
| testing a crossover ps,just found this in an old book7.1ohms LEFT MID/HIGH 8+6.4=4+3.2=7.26.8ohms LEFT Bass 6.87.0ohms RIGHT MID/HIGH 7.5+6.5=3.75+3.25 6.8 ohms RIGHT Bass 6.8i must have taken these measurements of the speakers a few years ago,which are different to ... | |
| testing a crossover wow,such a lot of input,thx guys.okFiesta 1st," Are you SURE that when you bi-amped the speakers after getting the amp back from servicing that you didn't forget to remove the second set of cables to the low and mid/hi inputs? "the two amp to spe... | |
| testing a crossover Hi rodman,whn everything is connected in a one or two amp system is in use ,everything sounds great,the sound is amazing, slightly better with two power amps {obviously},but nothing is a miss,its just that it keeps blowing one amp,the one driving... | |
| testing a crossover pps,just to add to my explanation ,i feel that there might be a value issue here,what do you guys think,ive possibly fitted the wrong value caps{i dont think i have,as i would have compared them before fitting}but they are definitely different typ... | |
| testing a crossover pps,does any know how to remove hot glue ??,the easy way | |
| testing a crossover ps,thankyou thomas for the explanation and time,you know who you are. | |
| testing a crossover thank you all guys i am so honoured for all your help,but i think i am going to go for the simple fact,that,i think all these problems may have started when i changed out all the caps,on the cross over,im going to find the old ones which i removed... | |
| testing a crossover i had a good play about with them both today,x-overs,couldnt find a problem ,maybe i should just strip them down,or one,check all parts then reasemble,not sure how to test the inductors though,as i can see i dont know enough, I can test parts but ... | |
| testing a crossover pragmasi- 1) Original test with everything assembled showed 0Ω resistance across the MF/HF +/- terminals on the back of the speaker.2) Those terminals connect directly to IP+ and IP- on the crossover PCB.3) With the crossover disconnected the DC ... | |
| testing a crossover fiesta-" an ohm meter test between the HF+ and LF+ terminals should be 0.0 ohms. Same should be true of the HF- and LF- terminals. This can be measure at the speaker or amplifier terminals."measurements for above,taken on the x-over both OL ,ohms | |
| testing a crossover shorting links on speaker binding post havent ever been used,to go from bi-wire to normal two wire ,or bi-amp to normal two wire config |