sbrownnw
Responses from sbrownnw
| variance of +/- 10 Hz with 1 kHz test tone Second run of over 50 seconds was much better:mean freq: 1001.4 Hzraw freqmax deviation (relative): -.75% / +.68%max deviation (absolute): -7.5 Hz / +6.8 Hzlowpass-filtered freqmax deviation (relative): -.10% / +.05%max deviation (absolute): -1.0 ... | |
| variance of +/- 10 Hz with 1 kHz test tone Correction, speed is fluctuating between 33.27 and 33.43.Here are some more app numbers from the 35 second sampling:mean freq: 1001.3 Hzraw freqmax deviation (relative): -2.76% / +.63%max deviation (absolute): -27.6 Hz / +6.3 Hzlowpass-filtered fr... | |
| variance of +/- 10 Hz with 1 kHz test tone Ok, some new info here. I figured out why the Platter Speed app was not registering. I didn't realize that side 1 of the Clearaudio burn in LP is 45 rpm. Once I set the TTPSU to 45 rmp, the app registered the new data, which follows: - speed varie... | |
| variance of +/- 10 Hz with 1 kHz test tone @Gvasale and @Atmasphere, what is the formula you are using for these calculations? | |
| variance of +/- 10 Hz with 1 kHz test tone Should I try another platter to see if my current factory Rega one is defective? | |
| How much to spend on a decently good phono stage? Jasmine LP 2 mkII - under $600. Beat out the Vincent 2 boxer and the Pro-ject phono tube box. See my threads and system page. | |
| Used VPI Traveler v1 vs. New Rega RP3 Make sure you use adjust dial at the back of the tonearm and not the counterweight itself to set tracking force. | |
| Rega RP6 VTA issue I like my RP6 setup. Non-rega cartridge with no spacers. See my system page. And yes, I do not mess with my setup except maybe the tracking force and antiskate. | |
| Any opinions of the ifi iphono vs Jasmine 2.phono After looking at the ifi, I like the the switchable EQs but I think it should have all the RCAs on the back with power and the EQ button in front. Much more user friendly. I think the Jasmine is one up with the separate non wall-wart power supply | |
| Any opinions of the ifi iphono vs Jasmine 2.phono Never heard the ifi iphono but I love my Jasmine LP 2 mkII. I compared it to 2 other phono stages here:http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1349194602Jasmine won out over the Vincent 2 boxer and the pro-ject phono tube box with upgrad... | |
| Pro-ject Debut Carbon vs Debut III ?? RP3 after owning two pro-ject tables. | |
| Pro-ject Debut Carbon vs Debut III ?? Be careful, both of these tables canhave low tonearm bearing tolerances = bad = can damage your records. | |
| turntable mats: should I use one? It is usually recommended that a clamp is used with acrylic platters. I have a clearaudio clever clamp that I don't need anymore after going to a rega rp6. Email me if interested. | |
| Interesting analog experience My cat will only sit on my analog cabinet or speakers when vinyl is playing. Smart cat, some call it a Linnkat. | |
| Turntable suggestion -- budget.. or not? http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1347380943 |