2. speakers
  3. 1168739346

A Bright Pair of Watt Puppys

I'd love some suggestions on taming my bright system. My Watt Puppy 6's are really bright and it often seems on many recordings as though the tweeter and midrange are just way louder and more dominant than the bass. Often, to get more bass punch (or just warmer sound) I find myself wanting to turn the volume up. This helps the bass level a bit but also sends the rest of the spectrum thru the roof: it gets very loud.

Although I assume my room is too small for these speaks and I need some treatment, can't believe this is the only issue here. Watching other woofers at CES for example, the things extend rapidly right out of the enclosures on systems that sounded warm to me. My drivers barely move at all. Just doesn't seem right.

Also was told by the designer of Genesis speakers that my amp isn't powerful enough to control the bass on the Watt Puppys. That was a surprise.

Here's my system configuration:
WP 6
BAT VK-600
Bat 31-SE Preamp
Kimber 3033 speaker cables
Synergistic Research Alpha Sterling ITC
Shanling CD-100 dual output cd player
Furman power conditioner
Room Size: 15 x 25

Any suggestions? Anyone?
Thanks
/Lee
graywind11
graywind11 OP
20 posts
 
Thanks all for your thoughts. My guess is that room treatment (and placement) are my first step as I do have a few bare walls that are likely the culprit for first order reflections. Ceiling is entirely bare and is 10' high and left wall could use some treatment as well. Will also try dampening vibes under amp and component cabinet using stillpoints/vibrapods.

I do have a digital EQ and can alter sound as needed. But I prefer using my cd's tube output, which is now wired straight to pre, not EQ'd. My pre is also tube.

Thanks again for your suggestions.
/Lee
aball
2,018 posts
 
You may simply not like the Wilson sound but I think it is more likely that you don't have them setup properly. A very small change in placement (like 0.5 inches) can make a big difference sometimes. Since you don't have pictures of your setup, it is hard to help any more than that.

I disagree that your electronics or source are the problem. You need to play with speaker toe-in and distance from rear wall to see if your problem changes or gets eliminated. Try giving them just a little toe-in and move them closer to your rear wall first and see what happens.

Arthur
graywind11 OP
20 posts
 
Arthur,

The speaks are toed in accord to Wilson's instructions and sit about 1.5 feet in front of back wall, about 4.5' from side walls. One of the corners is actually not a corner at all but a passageway to stairwell.

I will play with placement more and, as Dan suggests, attempt to get some decent measurements.

Alas Roy, selling the speakers, as much of a gem of advice this one is, would be my very last thought. However, as soon as a pair of used Sarastros comes on the market, I may give in. ;-)
/Lee
colopilot
28 posts
 
Lee,
You say the room is 15 ft wide by 25 ft long and you have the speaks 4.5' from the side walls. So they are 6 ft apart. At what distance is your listening position? Could you be sitting in a bass null? Is the bass better/fuller in other places in the room?
Ag insider logo xs@2x
drubin
3,274 posts
 
And have you tried (are you able to) putting the speakers on the long wall?
More to discover