Acoustat Electrostatic spearkers
Not sure what you're asking... Love my Spectra IIs. If you're on Facebook, I suggest you ask questions on the Acoustat page. There are some serious subject matter experts there. https://www.facebook.com/groups/167493963322951 |
schweibnsk Acoustat Electrostatic speakers I had 2+2's for a long time, then had a chance to purchase a pair of 2's cheap. which I built a frame for and converted into 1+1's. These 1+1's were the best imagining and depth speakers I have ever owned. I crossed them over actively with 4th order 24db at 100hz to a pair of very rare Kef B1814's with had an FS of 19hz, in 11 cubic foot, ported enclosures that Neville Thiele nutted out the box design/port for me. Cheers George |
I sold them, it wasn't until much later that a few guys figured out how to make the OTLs stableUh yeah- that would be me... FWIW (one of Atma-Sphere's claim to fame was the first reliable OTL). Sure- just don't exceed the phase margin of the amplifier when you design the feedback loop (this is really all that was about, and it really shouldn't have been me that solved this, as its standard control theory which has been around for a very long time, and this rule applies to any tube amp or traditional transistor amp!). That was the Achilles heel of many OTLs. The designer(s) tried to get greedy in an effort to send the output impedance down, but the price for that wasn't worthwhile. However, OTLs don't need feedback to drive the Acoustats quite nicely! A good friend Frank (RIP) had a set and I heard them many times. |
I still own 2+2s perhaps for another three weeks or so until the Sound Labs arrive. I actually helped design the frame for the Monitor 4s (long story) 6's are not two pairs of 2+2s. They are two Three's stacked one on top of the other. Unless you have a very powerful amp capable of handling low impedances you do not want to parallel the interfaces. That would be asking for it. The intent was to use two channels of amplification per speaker. You are supposed to use a stereo amp behind each speaker instead of a mono amp. Put subwoofers under them and you'd be rocking for sure. Once I recover from the expense I plan on getting a pair of Atma-Sphere MA 2's. Our friend here would need 4 of them. Imagine that! |
