Had the 6's for many years. You need 2 stereo amps to drive them properly. Great speaker. Hope you enjoy them as much as I did.
Acoustat Electrostatic spearkers
I’m from old school, I still have and always will use these speakers. I have 2+2s now. I just pick up a set of model 6s which have two interfaces on each speaker. My question is can I just run speaker cable to the other from that to the power amp. Or should I run two speakers cable one to each interface. Or use a set of shot gun speaker cables.
- ...
- 14 posts total
In the early 90s I had 2 + 2s with both the interfaces and OTL tube amps, I much preferred the OTLs, and although they sounded much better than the interfaces, the amps weren't very stable. I witnessed many cherry glowing tubes. I sold them, it wasn't until much later that a few guys figured out how to make the OTLs stable |
Not sure what you're asking... Love my Spectra IIs. If you're on Facebook, I suggest you ask questions on the Acoustat page. There are some serious subject matter experts there. https://www.facebook.com/groups/167493963322951 |
schweibnsk Acoustat Electrostatic speakers I had 2+2's for a long time, then had a chance to purchase a pair of 2's cheap. which I built a frame for and converted into 1+1's. These 1+1's were the best imagining and depth speakers I have ever owned. I crossed them over actively with 4th order 24db at 100hz to a pair of very rare Kef B1814's with had an FS of 19hz, in 11 cubic foot, ported enclosures that Neville Thiele nutted out the box design/port for me. Cheers George |
- 14 posts total