Advice on switching to separates

Ground Hog Day.

Be happy with what you have.

Rich

Panu21 - I've had both the Harbeth M30 and Spendor S 3/5se and found they clearly benefited sonically when I upgraded the amplification. However, in my limited experience with separates in the 2.5-3.0k price range (used on audiogon) vs. integrated amps, the difference was marginal. If anything my current Graaf integrated (about 3.5 k used) is significantly better than the separates (albeit solid state) I was using at the time.

Just my 2c, it may be a stretch to find a pre and power amp for $1500 (used) that betters a decent integrated. Other folks may have some valuable suggestions.

The 2010s' 75W rating is probably a really nice match w/your Harbeths (BTW, the Exposure is a beautiful piece), and I'd say you would have to make a significant power/current jump to tell a real difference. I use old NAD pre/amp w/my Spendors, and although they are circa 1992, the combination is beyond good...balanced, smooth, and quiet. You may want to try a used NAD 272/162 combo for more current, dynamics, and low-end control. You could snag these for less than $800 on the Gon, and they may surprise you. Or how about a Parasound A21 and NAD 160 or 162? Could be another involving (and versatile) set up.

I'm a big integrated fan. I'm running Harbeth C7's with one. For $1500 absolutely stick with an integrated. If you want to upgrade, although the 2010s is nice (I had the 3010s2), there are several choices used that will move things up a notch or two. None will be separates.

But if your happy, just stay happy and save the $1500.