Audiophile recording and playback - Tascam DA-3000



Hi, some months ago I bought the Tascam DA-3000 recorder, having used a small Korg MR-1 for some years. I mainly record from my vinyl rig (Lyra Atlas – SME V – Hanss T30 – Aesthetix Io Eclipse – Einstein The Tube mk2).

I have found that even with the hassle of very big files (one LP = almost 3 GB), the dual speed DSD sound is superior to anything digital I have heard so far.

In my rig, analog blows digital out of the water, but this is the best candidate.

In a former thread, someone asked, is the Da-3000 ‘audiophile’ level. The answer is a clear yes.

This is the first digital recorder I have owned (after some DATs and others) that does not make me ashamed that my old analog and much-modded Revox A77 stands in my loft. Also, for some, the Tascam may be a good investment since its DAC may outperform the DAC you already have. I had a Stello DAC that went out the door.

However, some aspects of the Tascam are problematic, and others can probably be improved.

A first issue is connectivity and ease of use. It would be great if the Tascam could record to a hard disk, or at least play back from it. The manual says a hard disk can be connected through the USB port. I bought a Seagate Wireless Plus 1 TB hard disk to try. However, the Tascam won’t recognize it, even when I reformatted to Exfat (instead of NFTS). Perhaps it would be recognized if I reformatted to FAT32, but then I would not have any use of a big hard disk, the limit is 32 GB I think. So I am back to recording to my 32 GB Sandisk SD card, eight LPs or so, with hand written notes, what track is what title, and then carrying the card and paper to my main PC, naming folders and transferring the files. BTW this was very slow, 19 mbps, since my card reader was not USB 3 compliant, I changed, and now it is much better, 84 or so mbps.

The ideal would be to have the Tascam drive as a unit on my home network, this is why I bought the Seagate wireless, but as stated - no success so far.

Experiences with the Tascam (or similar), in this and other respects, are welcome.

Note that, the problems so far are minor, for me, compared to the benefits. The sound is usually much better than what I get from CDs or the web (excepting some SACDs). I can bring my analog rig around, so to speak, playing back on the Korg Mr-1 (or the Tascam itself, which is light weight and semi-movable). I think that DSD playback will become more easily available in the future. If Pono had included DSD, I would have bought one.
Ag insider logo xs@2xo_holter
I've had the Korg MR-2000 and now the Tascam DA-3000. Both very good recorders, but I personally feel the Tascam is better, especially when it comes to digital processing. There are large SD and CF cards that are very fast too so transfer to a computer is easier. The Korg USB interface is rather outdated since it is not USB2.0 certified.

However, IMHO, both Korg and Tascam units need substantial hot-rodding in order to come close to vinyl (at least my vinyl). To my ears, the DA-3000 with all-linear power supplies, new clocking and transformer-coupled ADC input (no Op Amps) is the closest to vinyl when recording in DSD.

Best wishes,
Alex Peychev
APL Hi-Fi
Alex - the usb on the Korg is only used to transfer files. As long as it does that, and it does that fine, I don't see any issue with it being certified. To transfer files I just go into usb mode and move the files onto the PC with Explorer. Easier and cheaper than moving a card.

My Korg has the Busman input mods. I do not plan to use it for playback. I prefer to use J River for playback.

Comparing vinyl to digital, either PCM or DSD, is very dependent on the DAC. When comparing PCM to DSD people are usually comparing the characteristics of the DACs rather than the formats.
Dtc, sure, that is the case with the Korg, but compare to 100MB/s transfer via USB3.0 using CF or SD card that are linear powered.

I had done a very extensive work on the Korg before giving it up. This includes external linear power supply and ADC input stage, as well as other things. Still I prefer the Tascam.

I never used the Korg or the Tascam for playback. Monitoring was done through a digital interface directly to my DAC.

Sure, I agree. However, I've don't know of a PCM DAC that can perform as well as DSD.

Best,
Alex Peychev
I have a Korg MR-2000s and am waiting to see if Tascam markets a recorder with a DSD256/11.2 MHz converter with BNC digital input/output for DSD (supports SDIF-3, etc. and DSD-raw formats).

It would be interesting if the Mytek Manhattan DAC/Preamp offered SDIF-3, etc., DSD support.

Nice setup, O_holter, btw :-)