What about one of those Black Ice/Jolida Foz XT-R?
Azimuth "recording"
I recently purchased a Technics 1210 GAE, and I am loving the detachable headshell. I have 3 cartridges in rotation 2 MC and one Mono. I wonder if anyone has any tips on how to "record" azimuth for quick resetting. I dutifully have recorded VTF, VTA, bias etc. for each cartridge for fast switching - but I am hoping to not have to pull out the test record and fozgometer with each switch to set AZ when I have other listeners such as my wife present. Usually only happens when I switch from MC to mono and back.
The azimuth for all but one of the cartridges (my mono) is fairly off when fastened to the arm in what I would consider the "straight" position. Once the azimuth is properly set the audio difference is very noticeable. I have though of snapping a photo of the cartridge head on with one of those plastic AZ tools to rough it in for quick switching so I can at least eyeball the angle. Any tips?
Cheers
The azimuth for all but one of the cartridges (my mono) is fairly off when fastened to the arm in what I would consider the "straight" position. Once the azimuth is properly set the audio difference is very noticeable. I have though of snapping a photo of the cartridge head on with one of those plastic AZ tools to rough it in for quick switching so I can at least eyeball the angle. Any tips?
Cheers
- ...
- 13 posts total
The azimuth for all but one of the cartridges (my mono) is fairly off when fastened to the arm in what I would consider the "straight" position. Once the azimuth is properly set the audio difference is very noticeable. If you have some problem with azimuth just with ONE of your cartridges, then you’d better buy a headshell with azimuth adjustment to set up your cartridge once !? Probably your mono is low compliance, so try 18g shell with azimuth and overhang adjustment. Different 15g version here. There are many nice headshells with azimuth adjustment available used or new. P.S. you can also change your technics tonearm, look for Reed 3p with azimuth on the fly :) |
@lewm , of course crosstalk is a problem with mono cartridges. Mahgister will tell you it is between the positive and negative pins:-) @chakster , This is off topic but I was just given a pile of old 78 RPM records. Do you have any recommendations for a 78 RPM mono cartridge? I have no idea what to get, just stabbing in the dark. |
- 13 posts total