Brinkmann Bardo and Tri-Planar VII-U armrest issue

I am able to turn the arm board (circle) but not back or forward. I am able to clear the arm rest by turning the armboard but the distance spindle to pivot is off.

Sarcher30

I cannot do it. The 3 holes for the Tri-Planar are not equilateral triangle but are isosceles.

Essentialaudio

I am good at setting up tables, that is not my issue.

I use the Feickert Universal and the MintLp to set up my analogue.

I learn not to depend on a dealer to set up your analogue several years ago.

It is just a matter to find a way to clear that arm from touching that arm rest. I've taugh of doing what Palasr suggest. I will probably have to contact Tri Mai on this matter.

Essential Audio

The issue has nothing to do with my dealer.

He always offered to set up my cartriges/arm/table over the years,even driving to my house to do so (the shop is approx 100 miles from where I live). But I decided that I had to learn how to do it myself.

It is a must to learn how to set up a turntable for someone to wants to be in analogue. With time, I became pretty good at it.

My issue has nothing to do on how to set up a table, I think it has more to do with the drilling of the armboard for the Tri-Planar.

I don't think there is anything wrong to be able to do it yourself.

As for service from my dealer, he always deliver to my door any equipment I will buy from him and help to set up (if it is heavy).

HI Pcosta

I read about this subject and contacted Tri Mai with this issue last year.

I am not the one who drill the holes for the armboard. I am able to get the right S2P by rotating the armboard on the Brinkmann.

Problem fixed! Thank you very much Ralph for your suggestion. It was a learning experience.

Acadie