Any thoughts on ultrasonic cleaners? My wife has one suitable for jewelry. There are also those Flux HiFi Sonic devices that purport to employ some not-so-ultra frequencies.
Build-up on stylus - any new cures?
Hi, I run a restored TD-124 and SME 3009 series II, a Shure V-15 III, and a JICO SAS stylus. The last record or two I played sounded a bit off and I wondered whether I had managed to wear out the stylus. Using a pocket microscope I bought for this, I was able to see that the stylus tip still has good "shoulders," so that much is good. However, it has an astonishing amount of sparkly white build-up around the diamond.
There is a thread on here from 2014 with good advice, and I've used slices from a magic eraser for some years now, occasionally with alcohol. Usually I clean the stylus every other record side with a dry ME. Any new thoughts on removing this junk?
One 2014 poster suggested gently dragging the stylus on the ME back to front. I have never done that but would like to hear if anyone thinks that is safe for the tip? Hopefully there is an inexpensive solution, thanks!
There is a thread on here from 2014 with good advice, and I've used slices from a magic eraser for some years now, occasionally with alcohol. Usually I clean the stylus every other record side with a dry ME. Any new thoughts on removing this junk?
One 2014 poster suggested gently dragging the stylus on the ME back to front. I have never done that but would like to hear if anyone thinks that is safe for the tip? Hopefully there is an inexpensive solution, thanks!
- ...
- 27 posts total
We wipe the stylus forward (towards me) with the little Ortofon round brush. No grooveglide used , although, it does make,records last longer. grooveglide only on the rare records! Stuff really kills pops & hiss from speakers. Don’t use at all anymore, %70:of my records have been put to my computer via technics sl1200mkII WITH the Ortofon Arkiv Concorde, and for the records that sound thin, less bass, I put on the nightclub II Concorde to put to my hard drive before cleaning a,bit with audiolab 3.0, then burn to CDs. I clean in the sink with Ivory mild soap and a painters corner brush. Then on a dry towel, and vacuum with my shop vac with felt pads I stuck to the underside of the attachment. Works a dream! |
https://www.amazon.com/Turntable-Lab-Audiosetup-Carbon-Stylus/dp/B01LOJMZ3K/ref=asc_df_B01LOJMZ3K/?t... Have a few of these. The Ortofon ones. Any brand will do. Ortofon sent me 2 of these when my X5-mc cantilever broke off years back. |
- 27 posts total