Can an owner's manual and schematic be found for an Electron Kinetics eagle 7a power amp

@gmosley, you may have found a treasure.

I have some experience with Eagle amps, but first listen to Ralph. As usual he offers sound advice.

For background, long ago I owned an Eagle 2A amp which was very musical and powerful. After that I had a pair of 400 mono blocs. However they sat in storage a few years before I sold them. I tested them briefly before selling them. Unfortunately the new owner then damaged his speakers, almost certainly because of filter cap failures.

Back when the 7A was a current product a friend bought one to drive his B&W 801s. Iverson told him there was no on/off switch because he couldn’t find one that didn’t burn out quickly with use, so simply plug and unplug the amp! My friend soon tired of that so found a knife switch to put inline on the power cord.

A guy who worked for Iverson later set up a repair/modification service for Electron Kinetic products but may no longer be in business.  I suspect schematics are not available.

Since you may not be familiar with Iverson and Electron Kinetics, search for an article from TAS on his strange disappearance, a truly weird story.

@atmasphere is so right, and thanks for mentioning that very important caveat. At its age, the caps are likely needing replacement. 

Jasonbourne71 and all the rest of you guys in audiogon world!! 

Thank you, guys, for all the advice about this amp, I will take you guys advice as it will be a task to find a tech that can do justice to this amp, as I look down this amp I do see two big cap's that are blue, would these be filter caps? and would these be the ones to change out to new cap's and match to the same spec's or better? if so I will try to find them.  I will not be leaving this monster on until it gets new caps.

Again Thank You guys!

Hopefully I will find a owner's manual.

The schematic

https://www.diyaudio/threads/electron-kinetics-eagle-7a-amp-help.

I hope you may find it useful.