Can Music Reference MR9 drive Tannoy DMT 215 II

Okay to achieve 2 ohms on the RM-9 all you have to do is hook up the positive lead on the 8 ohm tap and the negative lead on the 4 ohm tap. Do this for each channel. Then connect the corresponding ends to your speaker binding posts. I have done this with my RM-10 so it should work on your amp too. If you go over to the Music Reference frum on Audio Circle you will find more information on light loading.

That is a good tech you taught me Clio09. Will try that. @ Cr0517. Thanks. I did have the MR9 to drive the Acoustat. It sounded really good and nature but lack of bass. I then have to usu Martin Logan sub to get bass. Now the DMT 215 is too much bass so hope that with light loading would help.
Thanks.

Kinhoang: What are the dimensions of your listening room? There shouldn't be a problem with too much bass, unless the room is small, speakers are too close to room boundaries or crossover caps have been modified from the original design.

Jburidan, my room size is 25 x40. I did try them all from 2 ohms, 4ohms, 6 ohms and 8 ohms. That is very hard for me to tell the different. But I like the most is set at tap 4 ohms. It seems like less bass and more forward the mid. I hope my ears are correct. This is really fun because there will be many way to try and experiences with this monitor.
The next I would like to try is to drive this with the mono block Cary 2a3 SE. Hope this can drive this monitor good with less bass. Like everyone said this is very high sensitive and I don't play loud so it should be okay. Actually, when trying I should have take time to listen to it from each set up for a few days instead of only listen for a few songs then try different set up. All I can tell is they are almost the same sound and all are good anyway.
Thanks

Kinhoang,
It`d be very interesting to know how your speakers sound driven by the 2A3 amplifier. This is such a different type of amplifier compared to the Music Reference MR9.
Regards,