Ait,
I was going to mention that also but the 3m product to use costs around 15.00-20.00 per tube. From my experience you would need around (5) tubes to do a 14 awg 1.2mH inductor properly. While your add it cut channels for the inductor wire to travel, in the botton of the xover box, and fill this channel with the potting compound.
I was going to mention that also but the 3m product to use costs around 15.00-20.00 per tube. From my experience you would need around (5) tubes to do a 14 awg 1.2mH inductor properly. While your add it cut channels for the inductor wire to travel, in the botton of the xover box, and fill this channel with the potting compound.