Changing a speaker color

I've never painted speakers, but back in '02 I was working in a composite shop and I brought in some wooden window shutters, sanded off the old finish, shot them with two coats of USAirways blue and then a coat of clear and they are still holding a gloss shine to this day, so I do not see why it could not be done with wooden speaker cabinets.  . 

Are the speaker cabinets actually made of wood?  I've sanded some stuff before that wasn't wood, and some of it does some goofy stuff after the paint comes off.  I have no idea what it will take to get that gloss white to start coming off . . . maybe just start with a small inconspicuous area with some 80 grit (or even 100 grit) and see how it goes before you start sanding a large area.   

If the original paint is in good condition, it does not need to be stripped, only sanded to a matte finish. After removing all sanding dust, the original paint should function perfectly fine as a primer, assuming it had an automotive-grade finish to begin with. 

Remove the drivers and binding post plates prior to any of this of course, and mask off the holes. 

There is no way to achieve a true piano grade finish without a very controlled HVLP spray system/gun. I recommend that be handled by a professional, otherwise you’re likely to end up with runs, orange peel effect, or trapped debris.  
 

@akg_ca you underestimate the talent of many home enthusiasts.  While I am not a painter, there are many areas where I do the work myself because my work is better than the pros.  

I don't know about @jeff7630 but I wouldn't assume he is talentless.

Second, used speakers sell at half of new anyway.  if the paint isn't perfect, you still can get 7/16 of new. Don't pay 40% of new for a pro paint job.

And changing from an unusual color to black, probably improves resale.

Jerry

What’s 7/16, a new grading system ? 

Depending on what color you like, I've sometimes considered using a vinyl wrap instead.  Removable.