Considering the New Tekton Design Encores? AND Owners Group - Experiences/Questions


I am the very happy owner of the first pair of New Tekton Design Encores and I thought I would create this thread to answer any questions anyone might have regarding the Encore speakers, room considerations, and associated equipment. If you’ve order your pair already, please chime in. I really want to hear what other people’s experience are with these unbelievable speakers.

I drive my Encores with both an Art Audio Diavolo SET 300b Tube Amplifier with 8wpc and I switch in my 700w Nord One-Up SE Monoblocks for non-critical listening and some big pieces of music that benefit from the extra power.



  • Made under U.S. Patent 9247339 with multiple new patents pending
  • Proprietary loudspeaker design
  • Ultra-linear frequency response with ±.5dB deviation from 70Hz-20kHz
  • One single crossover element placed within the tweeter path
  • Ultra-linear, entirely time-invariant minimum-phase mid-range section
  • Proprietary patent pending 15 dome radiating hybrid MTM high frequency array
  • Two 6.5" mid-bass patented ’overtone & harmonic’ transducers
  • Dual 11" low-frequency transducers
  • ​96dB 2.83V@1m sensitivity
  • 4 Ohm design for optimum performance
  • 20Hz-30kHz frequency response​
  • Dimensions Width 13.25" x Depth 15.25" x Height 62"
  • 800 Watt power handling
  • Weight 175 lbs​
128x128jcarcopo
@jcarcopo,  I owned the AHB2 for a while and it is everything you said, clean, dead quiet and transparent. Then one day a friend brought over his 30 year old Mirror Image Audio amp. A 200 watt amp with the first 30 in class A. This old amp made the AHB2 sound thin and lacking in bass. I sold the AHB2 and eventually found an old MI amp used. This old amp is very impressive for when I’m not in the mood for tubes.
@lancelock Thanks for the comment. I think Benchmark should consider that since they are going after the audiophile market that maybe they might consider releasing an alternative version of an amp that’s less about specs and slightly more emotionally involving. I know this goes against their ethos of impeccable specs, but they would likley sell to a broader base if they offered something a tad more emotional sounding and not just simply measuring exceedingly well. It would be hard for me to feel compelled to buy the AHB2 based on specs alone. I will repeat their new preamp is exactly what I want from a preamp. Nearly no alteration or editorialization of the preceding source signal is what I’ve always wanted in a preamp.
Well, after an all day affair of putting the HPA4 in and running source direct repeatedly. The HPA4 is going back to Benchmark.

I'm very sad to say the HPA4 Preamp does rob me of some upper frequency sparkle and transient response. I've run through putting the hpa4 in and taking it out several times and running each DAC direct to either my Nord Monoblocks or my Art Audio Diavolo SET Tube 300b Amplifier to my Tekton Design Encores speakers and regardless of the DAC or amps I'm using I can hear clearly a noticeable drop in resolution, upper midrange clarity, and transient response. Plucks of guitars seem a little lifeless now. The overall sound is more homogeneous sounding and more 2 dimensional sounding. It's a warmer less neutral sound, but almost like a film coating painted on everything I hear. This is really disappointing because this preamp was supposed to take my system to the next level, but unfortunately it's a step backwards for me. I'm returning it to Benchmark, but I really feel bad about it all the same.
Jcarcopo,
I really appreciate your well written and clearly explained listening sessions.  You acquire audio components and give them a fair audition.  That is all one can ask for. I can imagine how terrific your current system sounds. 
Charles 
@jcarcopo I’ve been following your findings with interest, not because of our ’bet’, but as a fellow enthusiast and since I am personally interested in the Encores / Ulfberths as a possible next step.

First, I’m not surprised with your impressions of the Benchmark amp in your system, as relayed via the Encores. For me, this isn’t a pairing I’d recommend for the SEs and by default, your Encores.

Second, a friendly caution that some of what you may be reporting on and experiencing is break-in related. For example, the HPA4 was a keeper but is now going back (as reported within a 48 hour period). I’m sure you are making the right decision for you, but I’m also confident in saying that you may also be experiencing some anomalies tied to break in of the speakers.

If you haven’t already done so, reaching out to owners of the SEs and Ulfberths privately to get their suggestions on ideal pairings may be helpful and a fun exercise.

For example, even though I haven’t heard the latest LTA pairing I have a strong gut feeling that @lancelock ’s pre and amp combo is a Fantastic one that may give you what you are looking for, despite the difference in watts (vs the NORDs). If I remember correctly, LTA offers return privileges.

As you consider your options, I strongly suggest a High Current amplifier and a well reviewed power supply /conditioner.

For example, the SR PowerCell 12 SE with the Galileo PC elevated my Pass XP-20 - XA-30.8 combo to a level where I likely would not have looked for another amp combo (had the PowerCell been in system first).

Shoot me a PM if you want to discuss more in person over the phone.