I would try and bypass the CJ preamp, as it could be adding to much warmth, robbing you of exactly what you are saying you are missing ( try an inexpensive passive unit, such as a Schiit Sys, or a Douk Audio passive, the HiFi version on the Bay ). I went passive awhile ago, and would not go back to using a preamp. Enjoy ! MrD.
"Dazed and Confused" about upgrading current speakers
I currently have a pair of Golden Ear Technology model 7's. I don't have any particular or serious gripes about their sound quality. However, I think I could do better in overall sound quality, especially highs and midrange detail and clarity. I know and have read they are noted for their low distortion.
The following speakers may not be upgrades but I have given them consideration: Ohm Walsh Tall; Neat Iota and Iota Plus; and the Larsen 4.2 .
The Larson and the Neat seem overpriced, but their size and profile are attractive In addition. the very new Magnepan LRS..... and Magneplanar ..7. I realize that none of the above may provide a major and noticeable upgrade in sound. I am not as mobile as I used to be and so can't go county wide speaker shopping..
The last go-around of looking, I considered the Revel F-206 and the PSB Imagine T-2, but not many come up for sale, especially the PSB T-2. The Revel F-206 I have somewhat lost interest because of their size.
My electronics are definitely worthy of any of the above speakers and then some The amp is a BAT VK-200 (100RMS) Conrad Johnson PV-14L SE; preamp line stage;. Ayre CX7e mp CD player The separates could be replaced by a integrated amp, but that is not in the works at this time
Advice and recommendations welcome
Thank you,
S.J.
- ...
- 14 posts total
| Post removed |
This I can chime in on for I have been involved with upgrading the Loudspeakers internal wiring , connectors and especially upgrading the cheap stock crossovers , that most companies skimp on you can Dramatically improve Every aspect of its performance by putting in Highquality boutique capacitors ,resistors,and inductorsas well as quality solder .i just finished a $2k Monitor That competes with ease speakers 3x that. This is a very logical option if you ,or a friend can solder , |
| Post removed |
Ohm Walsh Tall link, scroll to the bottom, there is a room size chart and recommended model, what size room do you have?? https://ohmspeaker.com/speakers/walsh-tall/#wt-1000 |
- 14 posts total